EasyManuals Logo
Home>DigiTech>Music Pedal>CROSSROADS

DigiTech CROSSROADS User Manual

DigiTech CROSSROADS
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
5. MODEL
This knob selects one of the seven
different signature Eric Clapton tones.
1.“Sunshine of Your Love”
2.“Crossroads”
3.“Badge”
4.“Layla”
5.“Lay Down Sally”
6.“Layla” Unplugged
7.“Reptile”
Please refer to the Knob Function
Descriptions section on the following
pages for a more detailed explanation
of each MODEL.
6. INPUT
Connect your instrument to this jack.
Connecting a guitar cable to this jack
supplies battery power even though the
Indicator LED may not be lit. To
prolong battery life, disconnect all cables
when not in use.
7. Pedal Release Pins
These two pins are spring-loaded hinges that
hold the pedal in place. Push these pins in
to release the pedal from the pedal chassis
exposing the battery compartment.
(See the
Battery Replacement Diagram
at the end of this Owner’s Manual)
8. Pedal
Press the pedal to turn the effect on and off.
9. OUT 1 (AMP)
Connect this output jack to your guitar
amplifier.
10. Indicator LED
This LED indicates when the effect is
turned on. If the LED becomes dim or
does not light when using battery power
(with the cables connected), the battery
needs to be replaced.
11. OUT 2 (MIXER)
This output has been specifically designed
for use with a full range audio system. It is
designed to be plugged directly into a mixer
or recording device for optimal performance.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DigiTech CROSSROADS and is the answer not in the manual?

DigiTech CROSSROADS Specifications

General IconGeneral
BrandDigiTech
ModelCROSSROADS
CategoryMusic Pedal
LanguageEnglish

Related product manuals