The DigiVerb is a powerful studio quality reverb housed in a familiar
stompbox design. Seven high quality reverbs are easily accessed with the
twist of a knob.You can adjust decay, change EQ, and balance the level
for your particular application. You can even use the DigiVerb in an
auxiliary send whenever you need that extra reverb in the mix.
1. Level Knob
Controls the output level of the reverb effect. Turn this knob clockwise
to increase the output level, and counter-clockwise to decrease the
output level. When the Level knob is set to its maximum position, the
dry signal is completely removed so the DigiVerb can run in an effects
loop of a mixer.
2. EQ Knob
Controls the amount of high frequency boost or cut in the reverb signal.
Turn this knob clockwise to boost high frequencies, and counter-
clockwise to reduce high frequencies.
To Next Page
Loading...
Need help?
Power
Battery
Ports & interfaces
Weight and Dimensions
