.Treadle - This Pedal is used to bend the input note, bend between harmony intervals, or mix
detuning with your input signal.
. Bypass Switch - This switch turns the effect on and off.
. Input - Connect your instrument to this jack.
. MIDI In - Connect any external MIDI device to this jack for the purpose of controlling the
Whammy™ remotely.
. Power - Connect the provided power supply to this jack. Do not use any power supply other
than the supplied PS750 or PS913.
. Dry Output - This jack contains your dry guitar signal only. No effect is present at this
output.
.Wet Added Output - This jack contains a mix of your dry guitar signal, and the pitch shifted
signal produced by the Whammy™.
Page3
User’s Guide
To Next Page
Loading...
Need help?
General
