FIRE AND EXPLOSION HAZARD
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent
fire and explosion:
●Do not spray flammable or combustible materials near an open flame or sources of ignition such as
cigarettes, motors, and electrical equipment.
●Paint or solvent flowing through the equipment is able to result in static electricity. Static electricity
creates a risk of fire or explosion in the presence of paint or solvent fumes. All parts of the spray
system, including the pump, hose assembly, spray gun, and objects in and around the spray area shall
be properly grounded to protect against static discharge and sparks. Use DINO-POWER conductive or
grounded high-pressure airless paint sprayer hoses.
●Verify that all containers and collection systems are grounded to prevent static discharge.
●Connect to a grounded outlet and use grounded extensions cords. Do not use a 3-to-2 adapter.
●Do not use a paint or a solvent containing halogenated hydrocarbons.
●Keep spray area well-ventilated. Keep a good supply of fresh air moving through the area. Keep pump
assembly in a well ventilated area. Do not spray pump assembly.
●Do not smoke in the spray area.
●Do not operate light switches, engines, or similar spark producing products in the spray area.
●Keep area clean and free of paint or solvent containers, rags, and other flammable materials.
●Know the contents of the paints and solvents being sprayed. Read all Material Safety Data Sheets
(MSDS) and container labels provided with the paints and solvents. Follow the paint and solvents
Manufacturer's safety instructions.
● Fire extinguisher equipment shall be present and working
Sprayer generates sparks. When flammable liquid is used in or near the sprayer or for flushing or
● Keep sprayer at least 20 feet (6 m) away from explosive vapors.
ELECTRIC SHOCK HAZARD
This equipment must be grounded. Improper grounding, set up, or usage of the system can cause electric
shock.
● Turn off and disconnect power cord before servicing equipment.
● Use only grounded electrical outlets.
● Use only 3-wire extension cords.
● Ensure ground prongs are intact on power and extension cords.
● Do not expose to rain. Store indoors.
SKIN INJECTION HAZARD
High-pressure spray is able to inject toxins into the body and cause serious bodily injury. In the event that
injection occurs, get immediate surgical treatment.
● Do not aim the gun at, or spray any person or animal.
● Keep hands and other body parts away from the discharge. For example, do not try to stop leaks with
any part of the body.
● Always use the nozzle tip guard. Do not spray without nozzle tip guard in place.
● Use DP nozzle tips.
● Use caution when cleaning and changing nozzle tips. In the case where the nozzle tip clogs while
spraying, follow the Pressure Relief Procedure for turning off the unit and relieving the pressure
before removing the nozzle tip to clean.
●Do not leave the unit energized or under pressure while unattended. When the unit is not in use, turn
off the unit and follow the Pressure Relief Procedure for turning off the unit
●Check hoses and parts for signs of damage. Replace any damaged hoses or parts.
●This system is capable of producing 3630 psi. Use DP replacement parts or accessories that
are rated a minimum of 3000 psi
To Next Page
Loading...
Need help?
General
