DirecTV RC65 How To Do

3 ©2013, SolidSignal.com Reproduction is permitted provided copyright information is intact.
Step 1: Use the menus
Start by pressing the {MENU} button and
using the down arrow to go to “Settings & Help.” Press {SELECT}.
Conrm that “Settings” is highlighted and press {SELECT}.
Use the down arrow to go to “Remote Control” and press {SELECT}.
You should see a menu like this one. If you do not see the “Advanced Setups” menu, conrm
your receiver model (should be H21-H25 or HR20-HR24) and make sure the remote
is set to IR mode. (Need help resetting your remote to IR mode? Here’s a quick guide.)
Arrow down
to “Advanced
Setups” and press
{SELECT}.

DirecTV RC65 Specifications

General

Brand	DirecTV
Model	RC65
Category	Remote Control
Language	English