dji Smart Controller Enterprise User Manual

5
Specications
●
OcuSync Enterprise
Operation Frequency Range 2.400-2.4835 GHz; 5.725-5.850 GHz*
Max Transmission Distance
(Unobstructed, free of
interference)
2.400-2.4835 GHz:
10 km (FCC); 4 km (CE); 4 km (SRRC); 4 km (MIC)
5.725-5.850 GHz:
8 km (FCC); 2 km (CE); 5 km (SRRC)
Transmitter Power (EIRP)
2.400-2.4835 GHz:
29.5 dBm (FCC); 18.5 dBm (CE) ; 18.5 dBm (SRRC); 18.5 dBm (MIC)
5.725-5.850 GHz: 28.5 dBm (FCC); 12.5 dBm (CE); 20.5 dBm (SRRC)
●
Wi-Fi
Protocol Wi-Fi Direct, Wi-Fi Display, 802.11a/g/n/ac, Wi-Fi with 2×2 MIMO is supported
Operation Frequency Range 2.400-2.4835 GHz; 5.150-5.250 GHz*; 5.725-5.850 GHz*
The motors can only be stopped mid-ight when the ight controller detects a critical error. Use
with caution.
Be sure the Smart Controller is linked to the aircraft.
Refer to the user manual for more Smart Controller usage details (e.g. dual Smart Controller
operations).
The default ight control is known as Mode 2. The left stick controls the aircraft’s altitude and
heading, while the right stick controls its forward, backward, and left and right movements.
Manual Takeoff/Landing
Combination Stick Command to
start/stop the motors.
Slowly push the left stick up to
take o. (Mode 2)
Slowly push the left stick down until
the aircraft lands. Hold for a few
seconds to stop the motors.
OR
左摇杆 右摇杆
右左
左摇杆 右摇杆
右转左转
上升
下降
前
后
右转左转
上升
下降
前
后
右左
Left Stick Right Stick
Up
Turn Left
Left
Forward
Backward
Turn Right
Right
Down

dji Smart Controller Enterprise Specifications

General

Brand	dji
Model	Smart Controller Enterprise
Category	Remote Control
Language	English