20
If the front-light battery is at, it must be replaced with an equi-
valent 3V CR2032 battery:
The rear light is plugged into the rear mudguard, is controlled by
sensors and cannot be manually switched on/o.
Furthermore, the battery in the rear light must be replaced by an
equivalent 3V CR1632 battery as soon as it is empty:
Always turn off the
• e-scooter after riding.
• Always turn o the front light.
• Charge the e-scooter after every ride.
• Pull the locking lever to collapse the
e-scooter.
• Store the e-scooter in a horizontal position.
Operation
To Next Page
Loading...
Need help?
General
