IF SERVICE OF THIS TOILET IS EVER REQUIRED,
READ THIS BEFORE SERVICING PRODUCT.
DO NOT REMOVE TOILET FROM VEHICLE.
DO NOT SEPARATE CERAMIC BOWL FROM PLASTIC BASE.
DO NOT REMOVE FOOT PEDAL FROM BASE.
DISASSEMBLY OF COMPONENTS MAY VOID WARRANTY.
SEE MANUAL AND REPLACEMENT KITS FOR SERVICE INFORMATION.
Dometic Corporation
Sanitation Division
Call Customer Service: 1-800-321-9886 (8 a.m. – 5 p.m. ET)
STOP
TOILET DOES NOT NEED TO BE REMOVED FROM VEHICLE FOR BASIC REPAIRS (if necessary)
Flush ball seal – Dometic’s
ball seal allows future replacement of
worn or damaged ball seals without
requiring tools or toilet disassembly.
The ball seal can be changed in just
a few minutes without removing the
toilet from the oor. Detailed replace-
ment instructions are included with
replacement ball seal kits.
Snap-in water valve cartridge –
Allows easy replacement of worn
or damaged water valves. In cold
climates, be sure to follow winterizing
procedure in owner’s manual to help
avoid water valve failure. Refer to
replacement instructions in new water
valve kit prior to Removal or installa-
tion of water valve assembly.
Factory-sealed bowl-to-base
assembly – Unlike other
Dometic foot-pedal toilets, the
bowl and base of 300, 310,
and 320 series toilets should
not be separated for any
reason.
IMPORTANT INFORMATION
EN
To Next Page
Loading...
Need help?
General
