Installing the refrigerator RML10.4, RML10.4S, RML10.4T
20
5.6 Install the roof vent
➤ Seal the installation frame to make the connection waterproof (fig. e, page 8).
➤ Insert the installation frame and screw it down tightly (fig. f, page 8). Use all the
fixing holes for this.
➤ Insert the hood and screw it down tightly (fig. g, page 8).
5.7 Securing the refrigerator
!
I
➤ Move the refrigerator into its final location.
➤ Fasten the six screws (fig. h 1, page 9) through the six plastic washers in the
sides of the refrigerator, and further into the wall.
➤ Put the caps (fig. h 2, page 9) onto the screw heads.
No. in
fig. d, page 8
Description
1 Hood
2 Installation frame
CAUTION!
Only screw through the receptacles provided, otherwise foamed com-
ponents, such as cables, can be damaged.
NOTE
Attach the side walls or the attached strips so that the screws are tight,
even when under increased loads (while driving).
To Next Page
Loading...
Need help?
General
