SinePower Scope of delivery
9
2.3 Operating the appliance safely
!
WARNING!
• Operate the device only if you are certain that the housing and the
cables are undamaged.
• Even after the fuse triggers, parts of the inverter remain live.
• Always disconnect the power supply when working on the device.
A
NOTICE!
• Make sure the air inlets and outlets of the device are not covered.
• Ensure good ventilation.
• Do not connect the 230 V output of the inverter (fig. 5 1, page 5) to
a different 230 V source.
3Scope of delivery
• Sine wave inverter
• 4 holders
• Instruction Manual
4 Intended use
The SinePower inverters are used to convert a direct current of 12 V or 24 V into a
230 V AC supply of 50 Hz.
• 12 V:
SinePower MSI212
SinePower MSI412
• 24 V:
SinePower MSI224
SinePower MSI424
Rechargeable devices with USB interface can be charged via the USB port (5 V,
2000 mA).
This device is exclusively intended for vehicle use.
MSI200-MSI400-IO-16s.book Seite 9 Freitag, 27. Oktober 2017 9:59 21
To Next Page
Loading...
Need help?
General