EasyManuals Logo

Ducati Hypermotard User Manual

Ducati Hypermotard
227 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #183 background imageLoading...
Page #183 background image
Charge the battery
Attention
Have the battery removed at a Ducati Dealer or
authorized Service Center.
To gain access to battery, remove seat page 158.
Loosen screws (1), remove the positive cable (2) and
(ABS) positive cable (3) from the positive terminal and
the negative cable (4) from the negative terminal,
always starting from the negative one (-) and remove
the battery from its compartment.
Attention
The battery gives off explosive gases; keep it
away from any source of ignition such as sparks,
flames and cigarettes. Charge the battery in a well-
ventilated area.
Charge the battery in a ventilated room.
Connect the battery charger leads to the battery
terminals: the red one to the positive terminal (+), the
black one to the negative terminal (-).
1 4
-
+
3
1
2
Fig 131
Important
Make sure the charger is off when you connect
the battery to it, or you might get sparks at the battery
terminals that could ignite the gases inside the cells.
Always connect the red positive (+) terminal first.
182

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ducati Hypermotard and is the answer not in the manual?

Ducati Hypermotard Specifications

General IconGeneral
Transmission6-speed
FrameTubular steel trellis frame
Engine TypeL-twin, 4 valves per cylinder, Desmodromic, liquid cooled
Torque71 lb-ft (96 Nm) @ 7, 250 rpm
Front Brake2 x 320mm semi-floating discs, radially mounted Brembo Monobloc 4-piston calipers
Rear Brake245mm disc, 2-piston caliper

Related product manuals