Ducati Hypermotard User Manual

ALL DEFAULT (Resetting the default
parameters of all Riding Modes)
This function allows restoring all Ducati setup
parameters for SPORT, TOURING and URBAN Riding
Modes.
To display this function, access the Setting Menu and
select the "R.MODE" page.
Use buttons (1) and (2) to select the "ALL DEFAULT"
indicator, then keep button (4) pressed for 3 seconds.
Now the "ALL DEFAULT" wording will be replaced by
the "PLEASE WAIT..." indicator, which will be
displayed for 3 seconds to inform the user that the
instrument panel is restoring the default parameters
for all Riding Modes.
After this time (3 seconds), the "EXIT" indicator will be
automatically highlighted; press button (4) to quit this
page and go back to the setting menu.
Note
If on ALL DEFAULT lettering right side a symbol
is displayed, this means that the default setup is
active, namely that the parameters shown are those
set up by Ducati.
88

Ducati Hypermotard Specifications

General

Transmission	6-speed
Frame	Tubular steel trellis frame
Engine Type	L-twin, 4 valves per cylinder, Desmodromic, liquid cooled
Torque	71 lb-ft (96 Nm) @ 7, 250 rpm
Front Brake	2 x 320mm semi-floating discs, radially mounted Brembo Monobloc 4-piston calipers
Rear Brake	245mm disc, 2-piston caliper