Ducati MONSTER 696 - Code Card for Engine Start

Immobilizer override procedure
Should the immobilizer become locked, you can
perform the “Immobilizer Override” procedure from
the instrument panel by entering the relevant
function as described below.
Enter the menu and go to page "COD.".
Note
This menu should only be active when at least
one Immobilizer error is present.
With this page selected, the initial code is always
displayed as “00000”. If you hold pressed switch
(1Fig. 9), in position B “
“ for 3 seconds, you will
access the procedure for entering the electronic code
given on the Code Card.
B for 3s
B for 3
A
A
A
A
A
A
A YES
NO
A
A
A
B for 4
B for 2
B for 1
B for 5
code
ok?
Fig. 34
65