EarthQuake M200 User Manual (English)

Questions and Answers:

B
bvazquezJul 25, 2025
How to troubleshoot starting issues in my EarthQuake Lawn Mower?
- B
  Betty PaceJul 25, 2025
  If your EarthQuake Lawn Mower engine won't start, several factors could be at play. First, ensure the spark plug wire is securely connected. Then, prime the engine. Check the spark plug for defects or incorrect gapping and replace if necessary. Make sure the fuel tank isn't empty—add fuel if needed. A dirty carburetor or fuel line could also be the culprit; clean them accordingly. Additionally, a dirty air filter should be replaced. If the engine is flooded, wait a few minutes before attempting to restart. Ensure the ON/OFF switch is in the correct position. Stale gasoline should be drained and replaced with fresh gas. Finally, inspect the ON/OFF switch and wiring for any defects, replacing parts as needed.
M
michael73Jul 30, 2025
Why does my EarthQuake Lawn Mower engine run poorly?
- K
  Kelli KruegerJul 31, 2025
  There are several reasons why your EarthQuake Lawn Mower engine might run poorly. A bad spark plug could be the cause, so replace it. Also, a dirty air filter can hinder performance, so replace it. If the gasoline is stale, drain it and add fresh gas. Another potential issue is a clogged engine cooling system; clean the debris screen and engine cooling fins. If these steps don't resolve the issue, take the unit to an authorized service center for carburetor adjustment.
R
Robert JohnsonAug 4, 2025
Why is my EarthQuake M200 Lawn Mower engine overheating?
- M
  Marissa ColeAug 4, 2025
  Your EarthQuake Lawn Mower engine may overheat due to several reasons. The engine cooling system might be clogged, so clean the debris screen and engine cooling fins. If the oil level is low, add oil. For carburetor adjustment, take the unit to an authorized service center.
J
Jack BellAug 9, 2025
What to do if my EarthQuake M200 Lawn Mower vibrates?
- J
  Jason ThomasAug 9, 2025
  If your EarthQuake Lawn Mower is vibrating, check if the socket head cap screws for the mower head are loose and tighten them with an L-handle wrench. Ensure the mower line lengths are approximately equal. Inspect all nuts and bolts, including engine bolts, for looseness. If the mower head is broken, replace the broken part.
R
robertsnathanAug 14, 2025
What to do if EarthQuake M200 engine will not stop running?
- A
  Aimee WileyAug 14, 2025
  If your EarthQuake Lawn Mower engine will not stop running, the ON/OFF switch may have failed. Inspect and replace any damaged parts. Also, check if the wire is disconnected from the ON/OFF switch; inspect, repair, or replace damaged parts as necessary.
M
Michelle WrightAug 19, 2025
Why does my EarthQuake Lawn Mower head not retain line?
- T
  Timothy LevyAug 19, 2025
  If your EarthQuake Lawn Mower head does not retain the line, make sure the mower line is properly attached by following the instructions on the decal. Check if the line retainer is broken and replace the mower head assembly if needed. Ensure you are using a 0.155" diameter mower line.

EarthQuake M200 Specifications

General

Brand	EarthQuake
Model	M200
Category	Lawn Mower
Language	English

Summary

Introduction

Welcome message and overview of the manual's purpose and product.

Registration and Service

Details on warranty registration, online and phone support.

Warnings and Safety Precautions

Owner's Responsibility

Owner's duty for assembly, safe use, and maintenance of the machine.

Special Messages

Explanation of symbols and notes for safety and operational information.

Before Operating Equipment

Instructions to read and follow before operating the equipment.

Intended Use / Foreseeable Misuse

Defines the product's intended purpose and prohibited uses.

General Safety Rules

Comprehensive safety guidelines for operation, clothing, and environment.

Slope Operation

Precautions and techniques for safe operation on slopes.

Children

Safety measures to protect children from mower hazards.

Service

Guidelines for handling fuel, maintenance, and safety during repairs.

Safety Decals and Warnings

Explanation of hazard symbols and safety instructions.

Specifications

Technical details of the mower, including dimensions and line specifications.

Features

Illustration and identification of main mower components and controls.

Unpacking and Assembly

Carton Contents

List of items included in the product packaging.

To Remove the Mower from the Carton

Steps for safely removing the mower from its shipping carton.

How to Raise the Handle

Instructions for adjusting the mower's handle height and angle.

Engine Preparation

Instructions for adding oil and fuel to the engine before first use.

Operation

How to Stop the Mower Head

Procedure for disengaging the rotating mower head.

How to Stop the Engine

Steps to turn off the mower's engine using the ON/OFF switch.

How to Use the Mower Head Control Lever

Guide on engaging the mower head and operating the control lever.

Engine Throttle Control

Information on the factory-set engine speed for optimal performance.

How to Start the Engine

How to Use the Primer Bulb

Instructions on using the primer bulb for cold engine starts.

How to Start the Engine

Step-by-step guide for starting the mower's engine.

Mower Tips

Advice for efficient cutting, line maintenance, and slope operation.

Maintenance, Service, and Storage

Maintenance Schedule

Scheduled tasks for checking and maintaining the mower.

General Recommendations

Advice on warranty, adjustments, and general mower upkeep.

How to Change Engine Oil

Detailed steps for draining old oil and refilling with new oil.

How to Replace the Mower Line

Step-by-step guide for replacing the cutting line with new line.

To Detach the Wheels

Instructions for removing and reattaching the mower's wheels.

How to Adjust the Height/Angle of the Handle

Procedure for adjusting the handle height for operator comfort.

How to Set the Height of the Cut

Guidance on adjusting the cutting height using socket head cap screws.

How to Replace the Drive Belt

Steps for removing and installing the mower's drive belt.

Belt Tension Adjustment

Procedure for adjusting belt tension for proper engagement and performance.

Storage

Steps for preparing the mower and engine for long-term storage.

Troubleshooting & Repair

Guide to diagnosing and fixing common operational issues.

Ordering Replacement Parts

Information on how to order parts, including required details.

Troubleshooting Guide

A detailed table of common problems, their causes, and corrections.

Slope Guide

Visual guide and safety warnings for operating on slopes.

Related product manuals

EarthQuake M200 User Manual

Table of Contents

Questions and Answers:

EarthQuake M200 Specifications