4.3 Optional accessories
Part number Description
5PXEBM48RT2UG2
5PXEBM72RT2UG2
5PXEBM72RT3UG2
Extended Battery Module
Network-M2 Eaton Gigabit Network Card (SNMP v1/v3 and IP v4/v6 // Ethernet 10/100/1000BaseT)
INDGW-M2 Eaton Industrial Gateway Card (Modbus TCP / RTU)
Relay-MS Eaton Relay card (1 x RS232 or 5 x Relay output)
INDRELAY-MS Eaton Industrial relay card (5x relay outputs with dry contacts for remote alarm information)
EMPDT1H1C2
Environmental Monitoring Probe Gen2
Compatibility : Gigabit Network Card (Network-M2) / Industrial Gateway Card (INDGW-M2) / Eaton
ePDU G3/G3+
MBP3KIF
MBP3KID
MBP3KI
HotSwap external maintenance bypass 4 FR
HotSwap external maintenance bypass 4 DIN
HotSwap external maintenance bypass 6 IEC
EFLX8F
EFLX8D
EFLX12I
FlexPDU 8 FR
FlexPDU 8 DIN
FlexPDU 8 IEC
5 Installation
5.1 Inspecting the equipment
If any equipment has been damaged during shipment, keep the shipping cartons and packing materials for the carrier or
place of purchase and file a claim for shipping damage. If you discover damage after acceptance, file a claim for
concealed damage.
To file a claim for shipping damage or concealed damage:
File with the carrier within 15 days of receipt of the equipment;
Send a copy of the damage claim within 15 days to your service representative.
Check the battery recharge date on the shipping carton label. If the date has passed and the batteries were never
recharged, do not use the UPS. Contact your service representative.
To Next Page
Loading...
Need help?
General
