Name: Eaton S811+T24 series
Brand: Eaton
Rating: 5 (1 reviews)

To Next Page

S811+ Soft Starter

User Manual

Effective November 2012

Supersedes July 2012

Default Chapter3
- Table of Contents3
Safety9
- Definitions and Symbols9
- Hazardous High Voltage9
- Warnings and Cautions9
Introduction11
- Overview11
- General Appearance Notes11
- Eaton S811+ Soft Starter11
Introduction12
- Standards and Certifications12
  - CE Conformance12
  - RF Susceptibility Statement12
- EMC Conformance12
Technical Data and Specifications13
- Environmental13
- Physical13
- Environmental Specifications13
- Unit Weight and Dimensions13
- Short-Circuit Ratings-Component14
- Short-Circuit Ratings-Enclosed Control (Fuses)14
- Short-Circuit Ratings-Enclosed Control (Breaker)14
- Short-Circuit Information with IEC Breakers15
Receipt/Unpacking16
- General16
- Unpacking16
- Storage16
- Shipping16
Installation17
- Mounting17
- Required Mounting Hardware17
- Dimensions18
- Power Wiring21
- Line and Load Power Wiring, S811+N22
- Line and Load Power Wiring, S811+T22
  - S811+V1023
- Power Wiring Alternatives23
- Control Wiring24
- Terminal Block Wiring Capacity25
- Terminal Block Functions25
  - Terminal Block Control Input Function Options26
- Input Configuration Options26
Operating Configuration26
- Relay Configuration Options27
- Control Power Requirements32
- Eaton Recommended 24 VDC Power Supplies32
  - Control Wiring Application Notes33
    - Exchanging a Digital Interface Module (DIM)33
    - Using a Supplemental Line Contactor33
Functional Description34
- Power34
- Control34
Functional Description34
- Inline Connected Soft Starter (Default)34
- Inside-The-Delta Connected Soft Starter34
- Starting/Stopping Options35
S811+ Operating Configuration40
- Introduction40
- User Interface40
- Digital Interface Module (DIM)40
- Setup and Starting41
Appendix B-Protection42
- Operating Parameters-Soft Start Configuration42
  - S81142
  - S81143
Appendix B-Protection43
- Operating Parameters-Soft Start Configuration-S81144
- Protection Parameters45
- Fault Code Options46
  - Alarm-No-Trip Option47
- Alarm-No-Trip Faults47
- Mains Voltage Operating Faults-Full SCR Start48
- Fault Trip Warnings48
  - Thermal Overload49
  - Soft Start Configuration Application Notes49
- Initial Torque Settings50
- Code Letters50
Troubleshooting51
- General51
- Before You Begin to Troubleshoot51
- Define the Problem52
  - Start Command Troubleshooting Flowchart52
- Troubleshooting-S811+ Does Not START52
- Troubleshooting-S811+ Stopped or Faulted53
  - Local Control Troubleshooting Flow Chart54
- Resetting the S81154
Accessories55
Accessories55
- Lug Kits55
- Optional Accessory Kits55
- Communications55
- Replacement Parts55
- Lug Kits-S811+T, U55
- Lug Kits-S811+V55
- Accessory Kits55
Appendix A-Parameters56
- Monitoring Menu56
- Soft Start Config Menu57
- Soft Start Config-S81157
- Soft Start Config-S81158
- Soft Start Config-S81159
- Protection Menu60
- Protections Menu60
- Advanced I/O Menu61
- Parameter List-Advanced I/O Setup62
- Network Setup Menu63
- Network Setup63
- LCD DIM Setup Menu64
- LCD DIM Setup64
Appendix B-Protection65
- Thermal Overload65
- Overload-Adjustment Range-Inline Connected65
- Overload-Adjustment Range-Inside-The-Delta Connected65
- Thermal Motor Overload Times66
  - Overload Trip Curves67
Appendix C-Ratings, Cooling and Power Losses-Inline68
- Power Ratings68
Appendix C-Ratings68
- Standard Duty-15 Second Ramp, 300% Current68
  - Limit at 40°C-Inline Connection68
- Severe Duty-30 Second Ramp And/Or 450% Current69
  - Limit at 50°C-Inline Connection69
Appendix D-Ratings, Cooling and Power Losses-Inside-The-Delta70
- Power Ratings70
- Standard Duty-15 Second Ramp, 300% Current Limit at 40°C-Inside-The-Delta Connection70
- Severe Duty-30 Second Ramp And/Or 450% Current Limit at 50°C-Inside-The-Delta Connection71
- Maximum Power Loss72
Appendix E-Motor/Application Considerations73
- Squirrel Cage Motor73
- Wye-Delta Motor73
- Part Winding Motor73
- Dual Voltage Motor73
- Multi-Speed Motor73
- Other Winding Configurations73
- Power Factor Correction Capacitors73
Appendix F-Pump Control Option74
- Pump Control Option74
Appendix G-Modbus Register Map75
- Modbus Register Map75
- Register Map75
Appendix G-Modbus Register Map76
Appendix H-Universal Communications Adapter85
- Universal Communications Adapter85
  - Wiring Diagram85
Appendix I-Troubleshooting86
- General Information87
- S811+ Fault Codes89
Appendix I-Troubleshooting Guide86
- New Applications Checklist-During Commissioning86
- Existing Installations Checklist86

Brand	Eaton
Model	S811+T24 series
Category	Controller
Language	English

Eaton S811+T24 series User Manual

Table of Contents

Questions and Answers:

Eaton S811+T24 series Specifications

Related product manuals