Eaton SPD Series Instruction Leaflet

Instruction Leaet IL158006EN
Effective November 2020
PX-SPD quick start guide
Device information
Features and benefits
•
Surge protective device (SPD)
Designed to protect against damaging transient
voltage events
•
Surge counter
Captures surge events on each phase, which
are categorized as low, medium, and high
according to the IEEET standard C62.41 and
logs up to 5000 events
•
Time-and-date stamped surge log
Logs transient surge events from your system,
records and saves in an event log with time
and date stamp viewable on a local display and
webpage, as well as a downloadable .csv file
•
Alarm
When an audible alarm is produced, an alarm
message is viewable on the display as well as
the web interface; an activated alarm can be
silenced locally
•
LED indicators
The tricolored (green/red/yellow) LED
protection status indicators are standard for
each phase and for neutral-ground protection
mode, when applicable
•
Percentage protection status
Indicates the amount of surge protection
active per phase and for neutral-ground,
when applicable
•
Connectivity
The RJ45 Ethernet port provides
communication between the Power Xpert™
SPD and webpage, ModbusT TCP/IP, or
BACnet/IP communications
•
Form C relay contact
Provides remote SPD status; the NO and NC
contacts change states when any phase detects
a total loss of protection
Remote monitoring capabilities
•
Onboard webpage
•
BACnet/IP
•
Modbus TCP/IP
•
PXG900 Gateway
•
Power Xpert Dashboard

Eaton SPD Series Specifications

General

Brand	Eaton
Model	SPD Series
Category	Surge Protector
Language	English