4
CS-500P
SYMBOL FORM
DECALS
Locate this safety decal on your unit. The complete
unit illustration found in the “NOMENCLATURE OF
PARTS” section will help you locate them.
Make sure the decal is legible and that you
understand and follow the instructions on it. If a
decal cannot be read, a new one can be ordered
from your ECHO dealer.
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
CAUTION: For safe
operation follow all safety
precautions and instructions
in Operator’s Manual
Chain oil fi ll
Wear eyes, ears and head
protection
Chain oiler adjustment
Chain brake operation
L
Carburetor adjustment
- Low speed mixture
Emergency stop
H
Carburetor adjustment
- High speed mixture
Choke control “Cold Start”
position (choke closed)
T
Carburetor adjustment
- Idle speed
Oil and gasoline mixture
ATTENTION
Pour un travail en sécurité, respectez toutes
les règles de sécurité et les indications du
manuel d’utilisation. (Le manuel d’utilisation
est disponibile chez votre agent ECHO.) Tenez
fermement la tronçonneuse des deux mains.
Part Number 890324-39630
TO AVOID KICKBACK
1. Contact of the guide bar tip with any
object should be avoided.
2. Tip contact may cause the guide bar to
move suddenly upward and backward
which may cause serious injury.
3. Always use two hands when operating
the chain saw.
Part Number X505-000450
Part Number X524-003800
REPLACEMENT BAR AND CHAIN
REMPLACEMENT DU GUIDE ET DE LA CHAÎNE
GUIDE BAR P/NO. CHAIN P/NO. CKA
GUIDE PIÈCE NO. CHAÎNE PIÈCE NO.
16” 16F0LD3366 20LPX66CQ/20BPX66CQ 43.5
18” 18F0LD3372 20LPX72CQ/20BPX72CQ 44.3
20” 20F0LD3378 20LPX78CQ/20BPX78CQ 39.6
CAUTION: For safe operation follow all safety
precautions and instructions in Operator’s
Manual. (Replacement manuals are avail-
able from your ECHO dealer.) Hold chain saw
fi rmly with both hands.
CAUTION/ATTENTION
Hearing protectors meeting the requirements
of CSA Standard Z94.2 should be worn.
Les protecteurs auditifs pouvant être porter
doivent recontrer les normes CSA Standard
Z94.2.
Part Number 890176-39431
POUR ÉVITER LES REBONDISSEMENTS
1. Éviter tout contact entre le nez du
guide-chaîne et un objet quelconque.
2. Tout contact du nez peut provoquer un
mouvement brusque vers le haut ou vers
le bas et entraîner de graves blessures.
3. Toujours employer lex deux mains
pour opérer la scie à chaîne.
Part Number X505-000460