Echo GT-200R - SERIAL NUMBER 07001001-07003100 User Manual

Grass Trimmer
Operator's Manual
MODEL GT-200R
Serial Number 07001001 - 07003100
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation.
X770000701
10/03
X7702277301

Echo GT-200R - SERIAL NUMBER 07001001-07003100 Specifications

General

Displacement	21.2 cc
Cutting Width	40 cm
Shaft Type	Straight
Starter System	Recoil
Engine Type	2-Stroke

Summary

Introduction and Manuals

Operator's Manual Overview

Details the content and purpose of the Operator's Manual for future reference.

Safety Manual Overview

Explains the importance of the Safety Manual for understanding hazards and safety measures.

Safety Symbols and Information

Important Safety Alerts

Explains WARNING and DANGER symbols, highlighting potential serious personal injury risks.

Safety Decals Identification

Guides users on locating and understanding safety decals on the unit for safe operation.

Decals and International Symbols

Shaft Decal Safety

Provides safety warnings and instructions related to the shaft decal on the trimmer unit.

International Operation Symbols

Illustrates and explains international symbols used for operation, safety, and maintenance.

Safety Instructions and Personal Care

Personal Condition and Safety Gear

Covers physical condition, protective gear (eye, hand, hearing), and proper clothing for safe operation.

Extended Operation Risks

Addresses risks of vibration, cold, and repetitive stress injuries during prolonged use.

Equipment and Safe Operation

Equipment Checks and Usage

Emphasizes using only ECHO-approved attachments and checking unit components for safety.

Safe Operation Practices

Details essential practices for safe operation, including clearing the work area and maintaining a firm grip.

Emission Control and Product Description

Emission Control System Details

Explains the EPA Phase 2 emission control system and product emission durability period.

Product Contents List

Lists all included parts and accessories with the trimmer unit for user verification.

Component Details

Power Head and Engine Parts

Details the power head assembly, including engine, clutch, fuel, ignition, and starter components.

Driveshaft and Cutting Attachments

Explains the driveshaft assembly, cutting head, and debris shield, including their functions.

Controls and Fuel System Parts

Details the throttle trigger, stop switch, primer bulb, choke, and fuel tank components.

Technical Specifications

Assembly Procedures

Plastic Shield Installation

Step-by-step instructions for installing the plastic debris shield onto the trimmer unit.

Nylon Line Head Installation

Instructions for attaching the nylon line head to the trimmer's threaded shaft.

Line and Handle Setup

Nylon Line Installation Guide

Procedure for threading new nylon line through the cutting head for operation.

Front Handle Adjustment

Guidance on positioning and tightening the front loop handle for optimal operator comfort.

Fueling and Fuel Handling

Fuel and Oil Requirements

Specifies the type of gasoline and two-stroke oil required, including mixing ratios.

Safe Fuel Handling Practices

Provides critical safety warnings and procedures for handling flammable fuel.

Fuel Storage Guidelines

Offers recommendations for storing fuel safely and effectively to maintain quality.

Operation: Starting a Cold Engine

Operation: Starting Warm Engine and Stopping

Starting a Warm Engine Procedure

Outlines the procedure for starting the engine when it is already warm.

Stopping the Engine Safely

Details the correct procedure for shutting down the trimmer's engine safely.

Maintenance Schedule and Skill Levels

Maintenance Skill Level Guide

Defines skill levels (1-3) required for different maintenance tasks and recommends dealer service.

Maintenance Intervals Overview

Presents a schedule for routine maintenance tasks based on usage and time intervals.

Air Filter and Fuel Filter Maintenance

Air Filter Service Instructions

Step-by-step guide for cleaning or replacing the air filter element for optimal engine performance.

Fuel Filter Replacement Procedure

Instructions on how to remove and replace the fuel filter to ensure proper fuel delivery.

Spark Plug and Cooling System Cleaning

Spark Plug Service Guide

Details how to inspect, clean, gap, and replace the spark plug for engine ignition.

Cooling System Cleaning

Explains how to clean the engine's cooling fins and air intakes to prevent overheating.

Exhaust System Maintenance

Spark Arrestor Screen Service

Procedure for cleaning or replacing the spark arrestor screen in the muffler assembly.

Cylinder Exhaust Port and Carburetor Adjustment

Cylinder Exhaust Port Cleaning Recommendation

Recommends professional cleaning of the cylinder exhaust port to maintain emissions compliance.

Carburetor Idle Speed Adjustment

Provides instructions for adjusting the idle speed on the carburetor, noting factory settings.

Lubrication Procedures

Drive Shaft Lubrication

Instructions for lubricating the drive shaft and gear case for smooth operation.

Troubleshooting Engine Problems

Long Term Storage Instructions

Servicing Information and Support

Parts, Service, and Dealer Contact

Provides information on obtaining genuine ECHO parts, service, and contacting customer support.

Warranty Registration and Manuals

Guides users on registering their product warranty and obtaining additional manuals or safety videos.