45
Using BIOS
+/- : Change Opt.
Enter : Select
:Select Screen
:Select Item
Memory Multiplier Configuration
Memory Mutiplier [10.67]
Memory Timing Configuration
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
CAS# Latency (tCL) 7
Row Precharge Time (tRP) 7
RAS# to CAS# Delay (tRCD) 7
RAS# Active Time (tRAS) 20
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Chipset Configuration
Scroll to this item to view the following screen:
Memory Mutiplier
Press <Esc> to return to the M.I.B III menu page.
Memory Multiplier Configuration
This item shows the information of Memory Multiplier Configuration.
CAS# Latency (tCL) (7)
This item determines the operation of DDR SDRAM memory CAS (colulmn address
strobe). It is recommanded that you leave this item at the default values. The 2T
setting requires faster memory that specifically supports this mode.
Row Precharge Time(tRP) (7)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
RAS# to CAS# Delay(tRCD) (7)
This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.
RAS# Active Time(tRAS) (20)
This item specifies the RAS# active time.
Press <Esc> to return to the M.I.B III menu page.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
