EDIFIER W320TN User Manual

Indicator Button
x3
EN 1. Power ON/OFF
2. Pairing
3. Reset
6. Charge
For more information, please visit our website:
www.edier.com
@Edier_Global @Edier_Global@Edierglobal
W320TN
Manual
Input: 5V 200mA(Earbuds)
5V 1A(Charging case)
Indicator Button
Indicator
1. Earbuds placed in the case and keep the case open.
2. Press and hold the button on the case for about 3s. White and green
LEDs will blink alternately.
3. Select "EDIFIER W320TN" in your device setting to connect. White LED
will blink once and then turn o when successfully.
1st Pairing
1. Earbuds placed in the case and keep the case open. White and green
LEDs will blink alternately.
2. Select "EDIFIER W320TN" in your device setting to connect. White LED
will blink once and then turn o when successfully.
Fast Pair(Phone with Android 6.0+)
Open the charging case and keep the case next to the phone(make sure
the phone is unlocked and Bluetooth® is on), and tap the pairing
notication when the pop-up window appears to connect eolessly.
Note：
For subsequent use, the earbuds will automatically connect to the device
used last time.
1. Earbuds placed in the case and keep the case open.
2. Press the button on the case 3 times to re-enter left & right
connection and clear the Bluetooth pairing records, white LED will
blink slowly.
3. Select "EDIFIER W320TN" in your device setting to connect. White
and green LEDs will blink alternately, then white LED will blink
once and turn o when successfully.
1. Power ON when the case is opened.
2. Power OFF when placed in the case and the case is closed.
Note:
If the earbuds does not pair with new device once power on, they will turn
o automatically after 10 minutes; if the earbuds does not reconnect to
the connected device once power on, they will turn o automatically after
120 minutes.
Remove one or both earbuds while listening to music, the music will
automatically pause; to resume the music, inse the earbud(s) back in the
ear(s). This function can be disabled or congured in "wearing detection"
settings via Edier Connect App.
5. Auto-pause music
Note:
1. When a call comes, the earbuds will automatically switch to the calling
device. After the call ends, the earbuds can switch back to the original
device.
2. Voice assistant can be enabled on the latest active smaphone if two
smaphones are paired with the earbuds simultaneously.
3. Switching from device to device, pause music on the current device, and
sta playing audio on the second device you would like to switch to.
4. Each time when powered on, the earbuds will automatically reconnect
with the two most recently-connected devices if available within the
eective Bluetooth range.
1. Pair device A with the earbuds. Upon success, keep the earbuds in the
case and keep the case open, then press and hold the button on the
case for about 3s to re-enter the Bluetooth pairing mode，and device
A is disconnected from earbuds.
2. Select "EDIFIER W320TN" in device B to connect successfully.
3. Select "EDIFIER W320TN" in device A to connect manually. White LED
will blink once and then turn o when 2 devices connected successfully.
4. Dual-device connection
Charging case
1. Please connect the case to power source
with the included Type-C charging cable for
charging.
2. Orange LED is steady lit when charging and
o when fully charged.
Earbuds
Place earbuds in the charging case and keep
the case closed.
Note:
Please do not charge the earbuds when there
is sweat or other liquids inside the charging
po, which may damage the earbuds.
Pinch Area Pinch Area
7. Controls
x1
x1
x2
x1
x1
x2
x3x3
x1x1
2s
2s
2s2s
Model: EDF200117
Edier International Limited
P.O. Box 6264
General Post Oce
Hong Kong
www.edier.com
2023 Edier International Limited. All rights reseed.
Printed in China
NOTICE:
For the need of technical improvement and system upgrade,
information contained herein may be subject to change from time to
time without prior notice.
Products of EDIFIER will be customized for dierent applications.
Pictures and illustrations shown on this manual may be slightly
dierent from actual product.
If any dierence is found, the actual product prevails.
True Wireless Noise Cancellation Earbuds Headphones
3s
Note:
1. Default sound control: noise cancellation o/adaptive noise cancellation.
2. Easily pinch the debossed area of earbuds stem to select functions.
3. Images are for illustrative purposes only and may dier from the actual
product.
4. Download Edier Connect App for more customizable control settings.

EDIFIER W320TN Specifications

General

Brand	EDIFIER
Model	W320TN
Category	Headphone
Language	English