1 Sub Woofer 2 Volume Control
3 Bass Adjusting Switch
5 Speaker Out Splint 6 Power Switch
7 Satellite Speakers (left and right) 8 User's Manual
9
4 Line In Port
Audio connecting cord
X100
Multimedia Speaker
Designed and Engineered in Canada
Edifier Enterprises Canada Inc.
User's Manual
Notice
Edifier and Edifier logo are owned by
and may be registered. And other brand names and trademarks are
the property of their owners.
Edifier Enterprises Canada Inc.
Overview
1
Welcome !
Very thanks for choosing Edifier multimedia speaker,it can
provide good sound for multimedia computer and home theater.
Before operating the system, please read this manual thoroughly
and retain it for future reference.
Operating
2
Overview
Notice
Edifier assumes no responsibility for any errors that may appear
in this manual. Information contained herein is subject to change
without notice.
Operating
SPECIFICATIONS
1
2
3 Playing the audio device
CONNECTING
Connect the satellite speakers to the output RCA on the
back panel of the Sub-woofer. Please note to match the color,
red to red and white to white.
Connect the subwoofer to the Audio device.
Using Audio connecting cord , connect the Line-input port
of the subwoofer to Line-out of the Audio Device (Such as the
computer, Discman, etc).
Plug the AC power plug into the wall outlet and turn on the
power switch, Now your speaker system is ready for Use.
Adjusting the volume control and Bass adjusting switch, then
you can enjoy the music.
Total P Output :
Input Impedance:
Input Sensitive: 45
Bass Unit: 4
Tweeter :
Dimension(Subwoofer): 191
Dimension(Satellite): 83
Gross Weight:
ower RMS 2.5W x 2 + 5W(THD=10%)
10K Ohm
0mV
" Aluminum coil, 4 Ohm
Unit " Paper coil, 4 Ohm
(W) x 183(H) x 222(D)mm
(W) x 108(H) x 80(D)mm
About 3.1 Kg
2 3/4
WARNING
To reduce the risk of electric shock ,Do not expose this apparatus
to rain or moisture.
Copyright 2003
All Rights Reserved.
Manual Edition 1.1, Nov 2003
Printed in CHINA
To Next Page
Need help?
General
