56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2110/LM2110-FC/LM2110SP/LM2110SP-FC/LM2120SP/LM2120SP-FC 41
INSTALLING THE BLADE
WARNING:
Always protect your hands by wearing heavy gloves or wrapping
the cutting edges with rags or other materials when performing any maintenance on
the mower blade. Always remove the battery pack when servicing or transporting the
mower.
NOTICE: To re-install or replace the
blade, be sure to replace the parts in the
exact order in which they were removed
(Fig. 22).
1. Wear protective gloves.
2. Position the blade on the shaft
with the surface stating “THIS SIDE
FACING GRASS" facing toward the
outside (Fig. 24).
3. Align the washer with the shaft and
assemble it in place.
4. Mount the bolt into the shaft
and turn it clockwise by hand to
pre-tighten it.
5. Insert a manual screwdriver or
metal rod, 1/4" (6.35 mm) or less in
the stabilizer hole. This is to stop the
blade from rotating while tightening
the bolt (Fig. 25).
6. Use a 9/16" (14 mm) torque wrench (not included) to tighten the bolt clockwise.
The recommended torque for the blade bolt is 36-43 ft-lb (49-59 Nm).
THIS SIDE FACING GRASS
24
Blade
25
Tighten
Stablizer
To Next Page
Loading...
Need help?
General
