To Next PageTo Next PageWhat to do if my EINHELL TC-PG 10/E5 Portable Generator engine does not start?
If your EINHELL Portable Generator's engine isn't starting, it might be due to the automatic oil cut-out. Check the oil level and top it up with engine oil if needed. Another possible reason is that the generator is out of fuel, so refuel it.
Why does my EINHELL TC-PG 10/E5 Portable Generator have no voltage?
If your EINHELL Portable Generator has too little or no voltage, the overcurrent circuit-breaker may have triggered. Actuate the circuit-breaker and reduce the number of connected devices. The air filter might also be dirty, so clean or replace it. If these steps don't resolve the issue, the controller or capacitor may be defective, and you should contact your dealer.
General| Fuel type | Gasoline |
|---|---|
| Motor type | Synchronous motor |
| Noise level | - dB |
| Rated power | - W |
| Cooling type | Air |
| Maximum power | 1000 W |
| Rated voltage | - V |
| Engine speed (max) | 3000 RPM |
| Fuel tank capacity | 4 L |
| AC outlets quantity | 1 AC outlet(s) |
| Engine displacement | 63.5 cm³ |
| Number of cylinders | 1 |
| Running time @ 2/3 load | 6.6 h |
| Engine number of strokes | 2 |
| Castor wheels | - |
| Product color | Black, Red |
Weight and Dimensions| Weight | 18800 g |
|---|---|
| Package depth | 430 mm |
| Package width | 353 mm |
| Package height | 365 mm |
| Package weight | 20300 g |
Explains the various warning symbols displayed on the generator for safe operation.
Illustrates the physical layout and numbered parts of the generator unit.
Lists all components and accessories included in the generator package.
Instructions on how to properly connect the generator housing to earth for static discharge.
Step-by-step guide on how to start the generator's engine.
Guidance on connecting electrical appliances to the generator's power outlet.
Procedures for safely shutting down the generator's engine.
Instructions for cleaning the generator and its air filter.
Guidance on checking, cleaning, and replacing the spark plug.
Information on general maintenance procedures for the equipment.
Procedures for preparing and storing the generator for extended periods and restarting.
