1
NT-2028
Wireless Barcode Scanner
User Manual
Package Contents
1x Wireless Barcode Scanner, 1x USB Receiver, 1x USB cable (type AB), 1x User Manual
Understanding the features
Audio and visual indications during data transmission:
Successful communication Sound (beeper) Blue light
Yes One beep Flash 1 time
No Three beeps Flash 3 times
Low power alarm
In case of instant auto-shutdown after startup, please charge the battery as the power is low.
Charging
Please fully charge the battery for rst time use. Shut down the scanner before charging.
When the reader/terminal is on charge, both the blue and the red lights on the base will be on.
When charging is nished, only the red one will be on.
Operating the scanner
Before you start scanning, make sure:
• The terminal has adequate power.
• The scanner, cable and the Host are connected.
www.elcom.eu
To Next Page
Need help?
General
