PROFESSIONAL LAUNDRY
W5600X
60/135
600/21.2
980 / 38 9/16
630
220
35
x
x
31 30.5
485/128+45/12 445/117+45/12
0.45/4.25/2.9 0.45/2.9/3.1
10.7/23.6 9.0/19.0
71 75
Washer extractor
W5600X
Images shown are a representation of the product only and
variations may occur.
Main options
• Stainless steel side panels
• Coin-meter
• Five compartment supply injector
• Third water inlet valve
Features and benefits
• Compass Pro
®
microprocessor offers:
– Large display and one control knob for easy program selection
– Language selection
– Quick selection and option buttons for the most frequently used
wash programs and options
• Extremely low water and energy consumption – see table below
• Four compartment detergent box for manual dosing of powder or
liquid detergent
• High extraction force for efficient dewatering
• Door with gasket and strong hinges built for heavy duty
operation
• Stainless and galvanized steel in all vital parts for high degree of
rust protection
• SuperBalance guarantees the correct extraction force
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D. Certified in accordance with UL/ETL standards.
Main specifications
Max. capacity filling factor 1:9 kg/lb
Drum, volume litre/ft
3
diameter ø mm/inch
Extraction rpm
G-factor
Heating alternatives, 230/400V electricity kW
steam
non-heated
Consumption data 6S03/6L33
”Warm” *
Total time min
Water consumption (cold+hot) litre/gallon
Energy consumption (motor/heating/hot water) kWh
Steam consumption kg/lbs
Residual moisture %
* Water temperature 59°F cold water and 149°F hot water.
** Depending on steam pressure.
Full load, 60 kg / 135 lb Half load, 30 kg / 67.5 lb**
To Next Page
Need help?
General
