PROFESSIONAL LAUNDRY
W575H
8/18
75
520
1245
450
5.4 / 7.5
2.0 / 3.0
x
x
47 44 47 44
50+12 26+7 62+0 33+0
0.15/0.35/0.75 0.15/0.25/0.45 0.15/- 0.15/-
- - 1.5 0.75
48 49 48 49
Washer extractor
W575H
Main specifications
Max. capacity filling factor 1:9 kg/lb
Drum, volume litre
diameter ø mm
Extraction rpm
G-factor
Standard heating alternatives electricity kW
Low energy heating alternatives electricity kW
steam
non-heated
Consumption data ”Normal 60°C”
Economy*
Total time min
Water consumption (cold+hot) litre
Energy consumption (motor/heating/hot water) kWh
Steam consumption kg
Residual moisture %
* Water temperature 15°C cold water and 65°C hot water.
** Programs with AS.
*** Depending on steam pressure.
Images shown are a representation of the product only
and variations may occur.
Main options
• Automatic liquid detergent supply (optional I/O board)
• Stainless steel front panel
• Connection to booking- /payment- system or coin meter
• Drain pump
Full load, 8 kg Half load**, 4 kg Full load, 8 kg Half load**, 4 kg
Features and benefits
• Compass Pro
®
microprocessor offers:
– Large display and one control knob for easy program selection
– Language selection
– Quick selection and option buttons for the most frequently used wash
programs and options
– Wash program packages optimized on Economy, Perfomance and Time.
(Available on general programs)
• AS – Automatic Savings:
– The machine weighs the linen and adjusts the amount of water and energy
according to the load. This leads to considerable savings in case the machine
is not fully loaded. (Available on general programs)
• Extremely low water and energy consumption – see table below
• Four compartment detergent box for manual dosing of powder or liquid
detergent
• High extraction force for efficient dewatering
• Door with gasket and strong hinges built for heavy duty operation
• Stainless and galvanized steel in all vital parts for high degree of rust protection
• Power Balance:
– Maximises the extraction force, leading to highest dewatering and savings in
drying
– Minimizes the stress on the machine, leading to trouble-free operation and
increased machine lifetime
– Reduces vibrations, making it possible to install the machine in all locations
El Steam***
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.
To Next Page
Need help?
General
