EMC
®
VNX
™
Procedure Generator
EMC CONFIDENTIAL version: 4.5
1 of 51
Replacing the Data Mover Enclosure (DME)
VNX5300 Procedures
VNX5300 Activity Type: Hardware Replacements
VNX5300 File/Unified HW Replacements: Data Mover Enclosure (DME)
五月 30, 2013
IMPORTANT: To be sure you have the latest SolVe generator application and content, always choose Yes
when asked if you want to update the application or repository.
REPORT PROBLEMS
If you find any errors in this procedure or have comments regarding this application, send email to
SolVeFeedback@emc.com
Copyright
©
2010 –2013 EMC Corporation. All rights reserved.
Publication Date: July, 2013
EMC believes the information in this publication is accurate as of its publication date. The information is subject to
change without notice.
THE INFORMATION IN THIS PUBLICATION IS PROVIDED “AS IS.” EMC CORPORATION MAKES NO
REPRESENTATIONS OR WARRANTIES OF ANY KIND WITH RESPECT TO THE INFORMATION IN THIS
PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
Use, copying, and distribution of any EMC software described in this publication requires an applicable software
license.
For the most up-to-date regulatory document for your product line, go to the Technical Documentation and Advisories
section on EMC Powerlink.
For the most up-to-date listing of EMC trademarks, see the list of EMC Corporation Trademarks on EMC.com.
All other trademarks used herein are the property of their respective owners.
To Next Page
Need help?
General
