Emerson Dixell XR70T Quick Reference Guide

1569005010 XR30-60-70T QRG EN r1.2 2021.05.10 XR30-60-70T 2/2
H-SWIPE
Drag a finger across the screen, from
left to right or from right to left
Browse: use horizontal swipe (right to left or left to right) to browse through
HOME, Virtual Keyboard and Info View. When in programming mode: use
horizontal swipe to browse through parameter menu.
V-SWIPE
Drag a finger across the screen, from
top to bottom or from bottom to top
(overlapping only one of the digits)
Modify: use vertical swipe (from top to bottom or bottom to top) to change a
parameter value.
PROGRAMMING MENU
TAP and HOLD 3 sec anywhere
TAP and HOLD “PRG”
H-SWIPE to browse
(…)
and icons are blinking
TAP and HOLD “PRG”
V-SWIPE to modify
TAP and HOLD “PRG” to save and exit
TECHNICAL SPECIFICATIONS
FEATURES
DESCRIPTION
Housing
Self-extinguishing PC
Dimensions
Front fascia 38x80 mm; case depth 81mm
Mounting device
Panel, 71x29mm panel cut-out
Degree of Protection
NEMA – UL 50e
Indoor use only, Type 1 enclosure
IP-IEC/EN 60529
Front panel: IP66
Rear Housing: IP00
Power Supply
230Vac 10%, 50/60Hz; 110Vac 10%, 50/60Hz; 100 to 240VAC10%, 50/60Hz
Overvoltage Category
II
Rated Power
12VAC: 3VA; 110VAC: 4VA; 230VAC: 4VA; 100-240VAC: 3VA
Rated Impulse Voltage
2500V
Display
White display, LED type, 3 digits with decimal point and multi-function icons
Buzzer
Internal, always present
Software Class
A
Terminal blocks / Terminal
Connections
Plug-in or screw terminal block, wire section between 0,5 and 2,5 mm
2
Max tightening force: 0.3 N/m for 3,5mm pitch, 0.4 N/m for 5,0mm pitch
Data Storing
Real Time Clock: Data maintenance up to 6 months with lithium battery. Other parameters: internal flash.
Type of Action
1.B
FEATURES
DESCRIPTION
Pollution Degree
2, non-condensing humidity
Ambient Operating
Temperature and Humidity
IEC/EN
0T60°C; 20-85 rH% (non-condensing humidity)
UL-CAN/CSA
-20T60°C; 20-85 rH% (non-condensing humidity)
Shipping and storage
temperature
-40T85°C; 20-85 rH% (non-condensing humidity)
Resistance to Heat
UL 94 V-0
Measurement range
NTC: -40T110°C, resolution 0.1°C or 1°C (selectable); PT1000: -100T150°C, resolution 0.1°C or 1°C
(selectable); PTC: -50T150°C, resolution 0.1°C or 1°C (selectable)
Accuracy
±1% compared to the full scale
Inputs
Up to 4 NTC, PTC or PT1000 (configurable); Up to 2 voltage free contacts
Relay Outputs
Nominal
UL
IEC
oA1
SPST 16A,
250Vac
Resistive load 12A (NO), 230Vac, 50K cycles
Motor load 240Vac (NO), 10FLA/60LRA, 30K cycles
Pilot Duty B300 (NO), 6K cycles
10(4)A (NO), 230Vac, 100K
cycles
oA2
SPDT 8A,
250Vac
Resistive load 10A (NO), 120/240Vac, 30K cycles
Motor load ½ HP (NO), 240Vac, 30K cycles
Motor load ¼ HP (NO), 120Vac, 30K cycles
Pilot duty B300 (NO), 30K cycles
8(3)A (NO), 230Vac, 50K
cycles
oA3
(*)
SPST 5A,
250Vac
Resistive load 5A, 120/240Vac, 50K cycles
Motor load 240Vac, 1.9FLA/11.4LRA, 30K cycles
Pilot Duty B300, 30K cycles
5(1)A, 230Vac, 50K cycles
oA4
(**)
SPST 8A,
250Vac
Resistive load 10A (NO), 120/240Vac, 30K cycles
Motor load ½ HP (NO), 240Vac, 30K cycles
Motor load ¼ HP (NO), 120Vac, 30K cycles
Pilot duty B300 (NO), 30K cycles
8(3)A (NO), 230Vac, 50K
cycles
Maximum ampacity on common
terminal “Line” (for oAx)
16A
I/O port
HOT-KEY: MAX voltage allowed is 5 VDC. DO NOT CONNECT ANY EXTERNAL POWER SUPPLY.
Purpose of control
Operating control
Construction of control
Incorporated control, intended to be used in Class I or Class II equipment
Approvals
R290/R600a: relays tested according to IEC EN60079:0 and IEC EN60079:15
IEC/EN 60730-1; IEC/EN 60730-2-9
UL 60730-1; UL 60730-2-9
CAN/CSA E60730-1; CAN/CSA E60730-2-9
(*) XR60T and XR70T only
(**) XR70T only

Emerson Dixell XR70T Specifications

General

Brand	Emerson
Model	Dixell XR70T
Category	Controller
Language	English