44 70 10170.
website: https://www.add-furnace.com/ 02-888-3472
Line ID: @add11 e-mail: add028883472@gmail.com
64 Series Pressure Reducing Regulators
W1943
Figure 1. 64 Series Regulator
Introduction
Scope of Manual
This manual provides instructions for the installation,
adjustment, maintenance, and parts ordering for
64 Series regulators. These regulators usually are
shipped separately for line or panel mounting or
installed on other equipment. Instructions and parts
lists for other equipment are found in separate manuals.
Product Description
The 64 Series regulators are spring-loaded, direct-
operated devices typically used to deliver constant
reduced pressure of gaseous fluids to pilot-operated
controllers and other pneumatic instrumentation.
Type 64: Basic regulator for 3 to 15 psig
(0,21 to 1,03 bar) outlet pressures
Type 64R: Internal relief version of the Type 64
Type 64B: NH
3
- service version of the Type 64
www.emersonprocess.com/regulators
To Next Page
Need help?
General
