Types 95L, 95H, 95HP, and 95HT
D100256X012
Instruction Manual
Form 1151
November 2009
W1888 W1888 W5652
Figure 1. Type 95L NPT Body (Left), Type 95H NPT Body (Middle),
and Type 95H Flanged Body (Right) Pressure Reducing Regulators
!
Warning
®
Types 95L, 95H, 95HP, and 95HT direct-operated
pressure regulators are suitable for pressure control of
steam, air, gas, water, oil, and similar uids requiring
constant outlet pressures between 2 and 400 psig
(0,14 and 27,6 bar). Typical 95L and 95H regulators
are shown in Figure 1.
—Pressure reducing regulator suitable for
controlling many gases and liquids. Cast Iron, Steel, or
Stainless steel bodies are available. Outlet pressure
range is from 2 to 30 psig (0,14 and 2,1 bar) with three
different springs available. Body sizes are available
To Next Page
Need help?
General
