8-10 FL10.3TR
Ye s
Audio is not outputted normally.(Tuner input)
FLOW CHART NO.4
Are the DIF signals outputted to the Pin(26, 28)
of CN302?
Check TU301 and their periphery circuit, and
service it if defective.
No
Are the audio(L/R) signals inputted to each pin of
CN301?
Replace Digital Main CBA Unit.
No
Check SP801,SP802 and their periphery circuit,
and service it if defective.
Are the audio(L/R) si
gnals inputted to the Pin(1, 44)
of IC801?
Are the audio(L/R) si
gnals inputted to the Pin(3, 5)
of IC871?
Ye s
Ye s
No
No
Are the audio(L/R) signals outputte
d to the Pin(1, 2)
of CN801 and CN802?
Are the audio(L/R) signals outputte
d to the audio
output terminal?
Check IC801 an
d their periphery circuit, and
service it if defective.
CN801: SP(L)
CN802: SP(R)
JK871: AUDIO(L)-OUT
JK872: AUDIO(R)-OUT
No
Ye s
Check the line b
etween Pin(6, 8) of CN301 and
Pin(1, 44) of IC801, and
service it if defective.
Check the line b
etween Pin(2, 4) of CN301 and
Pin(3, 5) of IC871, and service it if defective.
No
Check the line between Pin(1
, 7) of IC871 and audio
output terminal(JK871, JK872), and ser
vice it if
defective.
Pin(6) :
Pin(8) :
Pin(2) :
Pin(4) :
AMP(L)-OUT
AMP(R)-OUT
AUDIO(L)-OUT
AUDIO(R)-OUT
To Next Page
Loading...
Need help?
General
