Skip to content
Manuals+
User Manuals Simplified.
Home » Emerson » Connect Emerson/Sensi Thermostat to Wi-Fi
Connect Emerson/Sensi Thermostat to Wi-Fi
Contents [ hide
1 How to reconnect Sensi Thermostat to Wi-Fi
1.1 Sensi Smart Thermostat
1.2 Sensi Touch Smart Thermostat
1.3 Related Manuals:
How to reconnect Sensi Thermostat to Wi-Fi
Sensi Smart Thermostat
If you replaced your router, changed to a new Wi-Fi network, or updated your current Wi-Fi network’s
password, you’ll need to reconnect your Sensi thermostat to Wi-Fi.
To reconnect using an iOS device, determine what type of Sensi you have first:
1. On the thermostat itself, press “Menu.”
2. Press “Connect.”
If you don’t have a “Connect” option, you may need to replace your batteries and reset
the thermostat.
3. What display do you see? There are 3 different options:
Display is blank
Display shows 00
Display shows 11
Display shows 22
Display shows 11 or 22:
1. Open your Wi-Fi Settings on your iOS device.
2. Ensure that your iOS device is already connected to a 2.4GHz Wi-Fi network for setup. If you’re
connected to a 5GHz network, “forget” it for setup, and connect to a 2.4GHz network.
3. Scroll down until you see “Set up a new device…” You should see Sensi-XXXXXX underneath.
4. Tap Sensi-XXXXXX.
5. Your 2.4GHz Wi-Fi network should already be checked. Tap Next.
6. It may take up to 5 minutes to setup.
7. Tap Done.
Display is blank or shows 00:
1. Open the Sensi app on your iOS device.
2. Tap the + sign.
3. Choose the option, “Yes, it is on the wall.”
4. Make sure you’ve already pressed “Menu” and then “Connect” on the thermostat. The Wi-Fi icon
should be flashing.
5. Look at your thermostat screen and select the correct model option (thermostat screen will be
blank, or display a “00”)
6. The app will bring you to a page with several steps. Tap the Home button on your iPhone/iPad and
go into your phone’s Wi-Fi Settings.
To Next Page
Need help?
General
