EasyManuals Logo
Home>Emerson>Controller>Site Supervisor

Emerson Site Supervisor Quick Setup Guide

Emerson Site Supervisor
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Document Part # 026-4144 Rev 8 Page 1 of 10
©2018 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emerson.com for the latest technical documentation and updates.
The Site Supervisor is a system that combines energy management with the ability to monitor
various facility systems and provide alerts when there are issues that need attention. This
system provides HVAC control, Refrigeration System Monitoring and Control, as well as
Lighting Control. In addition, the Site Supervisor can monitor and report energy consumption
and take action to reduce the energy demand during peak periods. This can have a direct
impact on utility bills by reducing total energy costs. Site Supervisor ensures that the HVAC and
lighting systems are on and off at the appropriate times. This ability to monitor store conditions
can potentially minimize energy consumption.
For a copy of the full Site Supervisor Guide (P/N 026-1800), vist the Site Supervisor page on the
Emerson website: http://climate.emerson.com/en-us/products/controls-monitoring-
systems/facility-controls-electronics/facility-and-system-controls/site-supervisor-
facility-control to download or contact Emerson Electronics and Solutions Customer Service at
770-425-2724.
Ethernet Connection
1. ETH1 is designed to be used for directly connecting to laptop, PC, or optional
touchscreen with a CAT5 network cable.
2. The default IP for ETH1 is 192.168.1.250.
3. The optional Site Supervisor Display touchscreen default IP is 192.168.1.200 and will
connect automatically to the Site Supervisor when plugged into ETH1.
It is recommended
that you do not change these defaults.
4. ETH0 should be reserved for the secure network connections: store or corporate
networks. Ask your network administrator for the correct network IP address for ETH0.
5. ETH0 and ETH1 are physically separated for added security. Directly connecting to ETH1
will not access the secure network connection on ETH0.
Figure 1 - Site Supervisor
Figure 2 - Site Supervisor ETH 1 Ports
Figure 3 - Site Supervisor ETH 0 Port
Quick Setup Guide
Site Supervisor Controller

Other manuals for Emerson Site Supervisor

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Emerson Site Supervisor and is the answer not in the manual?

Emerson Site Supervisor Specifications

General IconGeneral
BrandEmerson
ModelSite Supervisor
CategoryController
LanguageEnglish

Related product manuals