support@enphaseenergy.com
1 877 797 4743
140-00027 Rev 02
If… Then…
Press and hold the Envoy menu button;
Release it when the Envoy displays "Get New
IP Address." Wait at least 15 minutes to see if
it obtains an internet connection (+Web).
You have zero or one bars for level
Relocate the Envoy to the power outlet
closest to the load center. If needed, install
the included Ethernet bridges to connect the
Envoy back to the Internet router.
The number of devices shown is less than
the number of microinverters installed
If the number of bars is zero or one, relocate
the Envoy to the power outlet closest to the
load center. If needed, install the included
Ethernet bridges to connect the Envoy back
to the Internet router.
If the number of bars is more than two, please
contact Enphase for further troubleshooting
assistance.
TROUBLESHOOTING
FURTHER TROUBLESHOOTING INFORMATION
If you need further troubleshooting assistance, see
Troubleshooting an Enphase Installation
at
http://www.enphase.com/support/downloads.cfm.
LEVEL
05:00 –WEB
Devices: 15
You see –Web instead of +Web
LEVEL
05:00 +WEB
Devices: 15
LEVEL Devices: 15
LEVEL
05:00 +WEB
Devices: 10
To Previous Page
Loading...
Need help?
General
