Name: ENSONIQ MR Rack
Brand: ENSONIQ
Rating: 5 (1 reviews)

Default Chapter6

Table of Contents6

Chapter 1-Welcome18

Chapter 2-Connections29

Chapter 3-Personalizing Your System42

Using the Global Pitch Bend Settings42
- Global Pitch Bend up and down43
  - To Determine the Global Pitch Bend down Range43
  - To Determine the Global Pitch Bend up Range43
- Setting the Global Pitch Bend Mode43
  - To Determine the Global Pitch Bend's Behavior44
Retuning the MR-Rack44
- Fine Tuning the MR-Rack44
  - To Fine Tune the MR-Rack44
- Using Pitch Tables44
  - To Assign a Global Pitch Table45
  - To Assign a Part to a Special Pitch Table45
Synchronizing the MR-Rack to MIDI45
- To Set the Global Tempo Clock as the Timing Reference45
- To Sync the MR-Rack's Clock to an External MIDI Device45
- To Set the Global Clock Tempo46
Protecting Part Settings46
- To Protect Part Parameter Settings When New Sounds Are Selected46
- To Protect Part Parameters from Reset All Controllers MIDI Messages46
- To Allow the Selection of New Sounds to Reset Part Parameter Settings47
- To Allow Reset All Controllers Messages to Reset Part Parameter Settings47
Letting the MR-Rack Pick Your Chorus or Reverb47
- To Let the MR-Rack Automatically Pick a Sound's Chorus or Reverb48
- To Protect Part Effect Bus Settings When a New Sound Is Selected48
Using the MR-Rack's Four Outputs48
- Routing Sounds to Specific Outputs49
Waking up51
- To Set How the MR-Rack will Wake up52
Protecting the MR-Rack's Memory52
- To Enable the Write Protect Prompt52
- To Disable the Write Protect Prompt52
Setting the Stak MIDI Channel53
- To Set the Stak MIDI Channel53
Adjusting Stak Coherence53
- To Perfectly Synchronize the Start of All Notes in a Stak53
- To Allow All Notes in a Stak to Start Normally54
Using MIDI Program Changes54
- Changing Performances Via MIDI54
  - To Select New Performances with MIDI Program Changes54
  - To Disable the Selection of Performances by Program Changes55
- Setting the Global Reception of MIDI Bank Selects and Program Changes55
Setting the MR-Rack's Response to Reset All Controllers MIDI Messages56
- To Set the Response to Reset All Controllers Messages56
Setting the MR-Rack's Response to All Notes off MIDI Messages56
- To Set the MR-Rack's Response to All Notes off Messages56
Using MIDI Sysex57
- Enabling and Disabling System Exclusive Communication57
  - To Enable or Disable Sysex Communication57
Using Sysex Device Ids57
- To Set the MR-Rack's Sysex Device ID Number57
Setting up New Real-Time Controllers57
- To Set up the Four System Controllers58
Learning How Much RAM Is Available for New Sounds59
- To Find out How Much Free Memory (RAM) Is Available in the MR-Rack59
Learning the Number of Banks on a Data Card59
- To Learn How Many Banks Are on the Currently Installed Card60
Identifying Installed Wave Expansion Boards60
- To Identify an Installed Expansion Board60
Using the MR-Rack to Play General MIDI Music61
- To Use the MR-Rack as a General MIDI Sound Module61
- To Set the MR-Rack to Power up Ready for General MIDI Music61
- To Reset the MR-Rack for Use with Non-General MIDI Music61
- MR-Rack General MIDI Details for the Curious62

Chapter 4-Parts63

Chapter 5-Effects111

Chapter 6-Special Commands149

Chapter 7-Expanding The MR-Rack172

Chapter 8-Insert Effect Parameters184

Chapter 9-Supplemental Information231

Brand	ENSONIQ
Model	MR Rack
Category	Synthesizer
Language	English

ENSONIQ MR Rack User Manual

Table of Contents

Questions and Answers:

ENSONIQ MR Rack Specifications

Related product manuals