CLASSIC-100 AXIAL EXTRACTOR FANS
Suitable for bathroom applications
Thank you for placing your confidence in EnviroVent by buying this produc t. It
has been manufactured in accordance with current technical safety regulations,
production and quality standards as laid down by the international Quality
Standard ISO 9001. Please read this instruction booklet carefully before installing
or operating the product. It contains important inf ormation on personal and user
safety measures to be followed whilst installing, using and carrying out
maintenance work on the equipment. Once the product has been installed, please
pass this booklet to the end user.
Check that the product is in perfect condition whilst unpacking. Any fault or
damage caused in origin is covered by the EnviroVent guarantee. Please make
sure that the product corresponds to the one you have ordered and that the
details on the instruction label fulfil your requirements.
IMPORTANT:
BE SURE TO HAVE READ AND UNDERSTOOD THESE INSTRUCTIONS BEFORE
BEGINNING THE INSTALL ATION PROCESS
SAFETY AND RECOMMENDATIONS
All wiring must comply with Building Regulations and the current I.E.E. Wiring
Regula tions (BS7671) or the equivalent standards fo r your country. The final
installation should be examined and tested by a competent person.
This fan is IP44 rated.
Do not install near sources of heat in excess of 40°C.
Position away from any source of water spray from a bath or shower. Do not site in
a shower enclosure.
Position the fan at the furthest distance from the main source of air replacement in
the room in order to achieve maximum airflow performance.
This appliance is not intended for use by young c hildren or infirm persons unless
they have been adequately supervised by a responsible person to ensure that they
can use the appliance safely. Young children should be supervised to ensure that
they do not play with the appliance.
•
•
•
•
•
CLASSIC-100
Instruction leaflet
To Next Page
Loading...
Need help?
General
