OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
The other control knobs are located at the base of the monitor (See Figure 3). By
changing these settings, the picture can be adjusted to your personal preferences.
• The power cord should be connected.
• Connect the video cable from the monitor to the video card.
• To turn the monitor on, press the power switch to ON position. The power indicator
will light up.
• Your monitor features a unique quick switch system which provides a picture within
seconds after the monitor is switched on.
NOTES
• Do not install the monitor in a location near heat sources such as radiators or air
ducts , or in a place subject to direct sunlight , or excessive dust or mechanical
vibration or shock.
• Save the original shipping carton and packing materials, as they will come in handy
if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the
factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly dampened with a mild detergent solution.
Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these
will damage the cabinet. As a safety precaution, always unplug the monitor before
cleaning it.
To Next Page
Loading...
Need help?
General
