EasyManua.ls Logo

Epiroc HB Series User Manual

Epiroc HB Series
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background image
Contents
© Construction Tools GmbH | 3390 5203 01 | 2019-08-06
Original Instructions
7

Table of Contents

Questions and Answers:

Epiroc HB Series Specifications

General IconGeneral
BrandEpiroc
ModelHB Series
CategoryIndustrial Equipment
LanguageEnglish

Summary

Introduction

About these Safety and Operating Instructions

Explains the purpose and structure of the safety and operating instructions.

Safety Instructions

Signal Words

Defines Danger, Warning, Caution, and Notice signal words used in safety messages.

Qualification Requirements

Specifies required qualifications for transporting, installing, operating, and repairing the attachment.

Intended Use Guidelines

Describes the proper and intended applications for the hydraulic breaker.

Prohibited Uses

Outlines prohibited uses that can cause serious injury or damage.

Personal Protective Equipment

Lists essential personal protective equipment (PPE) required for safe operation.

Carrier Safety Precautions

Safety measures related to the carrier, including load-bearing capacity.

Transport Safety Precautions

Safety guidelines for lifting and transporting the hydraulic attachment.

Hydraulic Installation Precautions

Precautions for safe hydraulic system installation and pressure management.

HP-Accumulator Safety Precautions

Safety precautions for handling the HP-accumulator, including explosion risks.

Piston Accumulator Safety Precautions

Safety precautions for handling the piston accumulator, including explosion risks.

Media and Consumables Precautions

Safety advice for handling hydraulic oil and consumables.

Explosion and Fire Prevention

Safety measures to prevent explosions and fires during operation.

Electrical Shock Prevention

Safety measures to prevent electrical shock hazards.

Falling Object Precautions

Safety measures regarding falling objects and fragments during operation.

Emissions Precautions

Precautions related to noise and dust emissions during operation.

Safe Machine Handling

Safety advice on operating machinery under the influence of substances.

Repair Safety Precautions

Safety measures and precautions to be taken during repair work.

Modification Safety Precautions

Precautions against making unauthorized modifications to the attachment.

Environmental Pollution Prevention

Measures to prevent environmental pollution from hydraulic oil.

Overview

Equipment Description and Components

Provides an overview of the main parts and components of the hydraulic attachment.

Hydraulic Breaker Functionality

Explains the basic operating principle of the hydraulic breaker.

Identification Signs and Labels

Explanation of warning symbols, name plate, and labels.

Applications of the Hydraulic Breaker

Lists the fields and types of applications for the hydraulic breaker.

Guarantee and Product Liability

Conditions that invalidate the product guarantee or liability.

Removing Packaging Instructions

Instructions for safely removing the packaging from the hydraulic breaker.

Scope of Delivery Details

Details the items included in the standard delivery of the hydraulic breaker.

Transport

Hoist Tipping or Falling Load Risks

Safety warnings regarding the risks associated with lifting and transport.

Percussion Unit Falling Hazard

Precautions to prevent the percussion unit from falling during transport.

Hydraulic Breaker Falling Hazard

Safety measures to prevent the hydraulic breaker from falling during lifting.

Transport Using a Crane

Step-by-step instructions for transporting the attachment using a crane.

Transport Using a Forklift Truck

Instructions for safely transporting the attachment using a forklift truck.

Transport Using a Truck

Guidance for securing and transporting the attachment on a truck.

Installation

Hot Hydraulic Oil Hazards During Installation

Safety warnings about hot hydraulic oil escaping during installation.

Environmental Protection During Installation

Environmental precautions regarding hydraulic oil spills.

Hydraulic Oil and Consumables

Covers mineral/non-mineral oil, grease, and gas specifications.

Adapter Plate Manufacturing

Guidelines for manufacturing custom adapter plates.

Adapter Plate Installation

Step-by-step instructions for installing the adapter plate.

Attaching Attachment to Carrier (Mechanical)

Procedure for mechanically mounting the attachment to the carrier.

Making Hydraulic Connections

Steps for correctly connecting the hydraulic lines.

Preventing Damage from Contaminated Lines

Precautions to prevent damage from polluted hydraulic lines.

Component Bursting Hazards

Safety warnings about bursting components and projectiles.

Hydraulic Hose Flailing Hazards

Precautions against hydraulic hoses flailing due to loose connections.

Hot Parts Warning

Warning about hot components that can cause burns.

Removing Attachment from Carrier (Mechanical)

Steps for mechanically detaching the attachment from the carrier.

Dismantling Hydraulic Connections

Procedure for safely disconnecting the hydraulic connections.

Removing the Adapter Plate

Instructions for removing the adapter plate.

DustProtector System

Procedures for DustProtector removal and installation.

Working Tool Procedures

Covers selection, installation, and removal of the working tool.

Operation

Component Bursting Hazards During Operation

Safety warnings about bursting components and projectiles.

Hot Oil Hazards During Operation

Safety warnings about hot hydraulic oil escaping during operation.

Hot Component Hazards

Warning about hot components that can cause burns.

Hydraulic Oil Environmental Concerns

Environmental precautions regarding hydraulic oil spills.

Hydraulic Oil Overheating Warning

Warning about high hydraulic oil temperatures and their effects.

Idling Stroke Damage Warning

Information on damage caused by idling strokes.

Initial Operation and Post-Storage Procedures

Procedures for initial startup and operation after extended storage.

Preparations Before Starting Operation

Steps to prepare the hydraulic attachment and carrier before operation.

Switching Breaker On and Off

Instructions for safely switching the hydraulic breaker on and off.

Performing a Functional Test

Procedure for performing a functional test before starting operation.

Correct Working Angle

Guidance on maintaining the correct working angle for efficient operation.

Optimizing Advance Distance

Instructions on selecting the correct advance distance for breaking material.

Impact Time Limitations

Recommendations on the maximum impact time on a single point.

Operation in High Ambient Temperatures

Operational adjustments and precautions for high ambient temperatures.

Operation in Low Ambient Temperatures

Operational adjustments and precautions for low ambient temperatures.

Prohibited Operation: Lifting/Transporting

Prohibition of using the attachment for lifting or transporting loads.

Prohibited Operation: Impacting

Prohibition of using the breaker as a sledgehammer.

Prohibited Operation: Moving Objects

Prohibition of using the attachment to move debris.

Prohibited Operation: Levering

Prohibition of using the working tool for levering.

Avoiding Blank Firing of Working Tool

How to avoid and what to do when blank firing occurs.

Cylinder End Position Precautions

Advice on avoiding operation at cylinder end positions.

Working with Safety Equipment: Underwater

Information on using the breaker for underwater applications.

Working with Safety Equipment: Tunnels

Precautions for using the breaker in tunnels and confined spaces.

Working with Safety Equipment: Hot Applications

Considerations for using the breaker in hot environments.

AutoControl System Functionality

Explanation of how the AutoControl system works during normal operation.

AutoControl System in Special Applications

Details on using AutoControl in special or reduced percussion applications.

Intelligent Protection System (IPS)

Explanation of the Intelligent Protection System (IPS) function.

PowerAdapt System Function

Description of the PowerAdapt system for overload protection.

Maintenance

Hot Oil Hazards During Maintenance

Safety warnings about hot hydraulic oil escaping during maintenance.

Hot Parts Hazard During Maintenance

Warning about hot components that can cause burns during maintenance.

Accidental Start Prevention

Measures to prevent accidental starting during maintenance.

Unexpected Movement Prevention

Safety measures to prevent carrier movement during maintenance.

Hydraulic Oil Environmental Concerns

Environmental precautions regarding hydraulic oil spills during maintenance.

Maintenance Schedule Overview

A detailed schedule of maintenance tasks and their frequencies.

Depressurizing the Hydraulic System

Procedure for safely depressurizing the hydraulic system.

Cleaning Precautions

Environmental precautions for cleaning water contaminated with oil/paste.

Cleaning Preparation Steps

Preparation steps before cleaning the hydraulic breaker.

Cleaning Procedure

Step-by-step procedure for cleaning the hydraulic breaker.

Checking Lubricant Film

Procedure for checking the lubricant film on the working tool shaft.

Automatic Lubrication System

Information on the automatic ContiLube® II lubrication system.

Lubricant Cartridge Replacement

Instructions for replacing the lubricant cartridge in the ContiLube® II.

ContiLube® II Operation Details

Key points and tips for operating the ContiLube® II system.

Manual Lubrication Procedure

Procedure for manual lubrication when the automatic system fails.

Chisel Paste Filling Device

Information on the chisel paste filling device and part numbers.

Checking Tensioning Bolts

Procedure for checking the tightness of tensioning bolts.

Checking the Working Tool

Procedure for checking the working tool for wear, chips, and cracks.

Checking Retainer Bars

Instructions for checking the retainer bars for wear and damage.

Checking Percussion Piston Impact Surface

Procedure for checking the percussion piston impact surface for damage.

Checking Wear Bushes and Impact Ring

Procedure for checking wear bushes and impact ring for wear and damage.

Checking and Cleaning DustProtector System

Procedure for checking and cleaning the DustProtector system.

Piston Accumulator Overview

Overview of the piston accumulator and related accessories.

Checking Piston Accumulator Pressure

Procedure for checking the gas pressure in the piston accumulator.

Releasing Piston Accumulator Pressure

Procedure for safely releasing pressure from the piston accumulator.

Filling Piston Accumulator

Instructions for filling or topping up the piston accumulator with nitrogen.

HP-Accumulator Safety and Checks

Safety regulations and information regarding the HP-accumulator.

Visual Check of HP-Accumulator

Procedure for performing a weekly visual check of the HP-accumulator.

Checking HP-Accumulator Fastening Screws

Procedure for checking and tightening HP-accumulator fastening screws.

Checking HP-Accumulator Gas Pressure

Procedure for checking the gas pressure in the HP-accumulator.

Checking Hydraulic Lines

Procedure for visual inspection of hydraulic lines and connections.

Checking and Cleaning Hydraulic Oil Filter

Procedure for checking and cleaning the hydraulic oil filter.

Checking Adapter Plate and Breaker Box

Procedure for checking the adapter plate and breaker box for damage.

Checking Adapter Plate Bolts for Wear

Procedure for checking adapter plate bolts for wear or damage.

Bolt Connections and Tightening Torques

Table of bolt connections, intervals, types, and required tightening torques.

Troubleshooting

Hydraulic Breaker Does Not Start

Troubleshooting guide for when the hydraulic breaker fails to start.

Hydraulic Breaker Operates Too Slowly

Troubleshooting guide for slow operation of the hydraulic breaker.

Impact Force Too Low

Troubleshooting guide for insufficient impact force.

High Impact Rate with Low Impact Force

Troubleshooting guide for high impact rate and low impact force.

Oil Leaks from Ports »P« and »T«

Troubleshooting guide for oil leaks from ports P and T.

Oil Escapes Between Cylinder Cover and Cylinder

Troubleshooting guide for oil escaping between cylinder cover and cylinder.

Oil Escapes from Installation Parts

Troubleshooting guide for oil leaks from installation parts.

Oil Escapes from Working Tool

Troubleshooting guide for oil escaping from the working tool.

Oil Escapes from High Pressure Accumulator

Troubleshooting guide for oil escaping from the high pressure accumulator.

Oil/Grease Escapes from ContiLube® II

Troubleshooting guide for oil or grease leaks from the ContiLube® II system.

Operating Temperature Too High

Troubleshooting guide for excessive operating temperatures.

Pressure Line »P« Flails Violently

Troubleshooting guide for violent flailing of the pressure line P.

Repair

Injury Risks in Repair

Safety warnings regarding injury risks during disassembly and assembly.

Sending Attachment for Repairs

Instructions and precautions for sending the attachment for repair.

Storage

Falling Hazard During Storage

Safety warnings about the risk of the breaker or tool falling during storage.

Short-Term Hydraulic Breaker Storage

Procedure for storing the hydraulic breaker for less than eight weeks.

Long-Term Hydraulic Breaker Storage

Procedure for storing the hydraulic breaker for more than eight weeks.

Storage After Twelve Months

Measures for long-term storage (over twelve months) to prevent failure.

Working Tool Storage

Instructions for storing the working tool to prevent corrosion.

Grease Cartridge Storage Safety

Safety precautions for storing grease cartridges.

Disposal

Environmental Damage from Consumables

Environmental precautions for disposing of consumables.

Hydraulic Breaker Disposal

Procedure for properly disposing of the hydraulic breaker.

Hydraulic Hose Disposal

Procedure for disposing of hydraulic hoses.

Hydraulic Oil Disposal

Procedure for disposing of hydraulic oil.

Chisel Paste and Grease Cartridge Disposal

Procedure for disposing of chisel paste and grease cartridges.

Technical Specifications

Noise Declaration Statement

Statement of declared sound pressure and sound power levels.

EC Declaration of Conformity

Conformity with EU Directives and Standards

Declaration of conformity with relevant EU directives and standards.

Related product manuals