Adjusting the Image Size
User's Guide
"Screen Size and Projection Distance"
Turn off the power for both the projector and the computer before connecting them.
The size of the projected image is basically determined by the distance from the lens to the screen.
The values should be used as a guide for setting up the projector.
Be sure to read the accompanying User's Guide
before using the projector.
Do not look into the lens while
the projector's power is turned on.
WARNING
The computer cable supplied with the projector may not match the monitor port on some
computers. In such cases, you will need to purchase a separate adapter.
Connecting to a Computer
User's Guide
"Connecting to a Computer"
Tip
* When installing against a wall, leave about 20 cm (7.9 in.) between the projector and the wall.
Quick Reference Guide
Quick Reference Guide
To computer
monitor port
Computer cable
(accessory)
30
(61 46)
40
(81 61)
60
(120 90)
80
(160 120)
100
(200 150)
200
(410 300)
Screen size
300"
(610 460 cm)
89
–
103 (2.9–3.4)
42 cm
(16.4 in.)
Centre of
lens
120
–
138 (3.9–4.5)
181
–
208 (5.9–6.8)
243
–
278 (8.0–9.1)
304
–
349 (10.0–11.4)
610
–
699 (20.0–22.9)
916
–
1050 cm (30.1–34.4 ft.)
4
(1.6)
6
(2.2)
8
(3.3)
28
(10.9)
14
(5.5)
11
(4.4)
20 cm
(7.9 in.)*
Distance from centre of
lens to bottom edge of screen
Computer/Component
Video port (blue)
Downloaded from: http://www.usersmanualguide.com/