QuickReferenceGide.fm
4/16/03
Adjusting the Image Size
The size of the projected image is determined by the distance from the lens to the screen. The
following values should be used as a guide for setting up the projector.
Connecting to a Computer
Turn off the power for both the projector and the computer before connecting .
Quick Reference Guide
Be sure to read the accompanying
User's Guide before using the projector.
WARNING
Do not look into the lens while the
projector's power is turned on.
p
The computer cable supplied with the projector may not match the monitor port on
some computers. In such cases, you will need to purchase a separate adapter.
s User's Guide
" Projection distance and screen size"
Distance from centre of lens to bottom edge of screen
Screen size
Centre of
lens
* When installing against a wall, leave about 20 cm (7.9in.) between the projector and the wall.
s User's Guide
"Connecting to a Computer"
To computer
monitor port
Computer/Component Video port (blue)
Computer cable
(accessory)
QuickReferenceGide.fm Page 1 Wednesday, April 16, 2003 6:03 PM