© 2014 Seiko Epson Corporation.
All rights reserved.
Printed in XXXXXX
1
2
3
EN
Start Here
TC
安裝說明
Unpacking
拆開包裝
Contents may vary by location.
內容物可能會依地區而有不同。
Do not open the ink cartridge
package until you are ready
to install it in the printer. The
cartridge is vacuum packed to
maintain its reliability.
在準備好要安裝於印表機之前，
請勿拆開墨水匣包裝。 為維
持可靠品質，墨水匣採用真空
包裝。
A
B
C
Remove all protective materials.
拆開所有保護材料。
Keep the transportation lock in the accessory box for later use.
將搬運鎖存放在配件盒內，以供日後使用。
Turning On
開啟電源
A
B
C
Connect and plug in.
連接並插入。
Turn on and tilt.
開啟並掀起。
Select a language.
選擇語言。
Installing the Ink
Cartridges
安裝墨水匣
For the initial setup, make sure you use the ink cartridges that came with this printer. These cartridges cannot be saved for
later use.
進行初始設定時，請確定使用的是此印表機隨附的墨水匣。這些墨水匣不能貯存供日後使用。
A
B
C
Open.
拆開。
Shake and unpack.
輕輕搖動並拆開包裝。
Remove yellow tape.
撕下黃色膠帶。
D
E
Install.
安裝。
Press down (Click).
壓下 (喀嗒聲)。
Close.
關閉。
F
Wait about 10 min.
等候約 10 分鐘。
The initial ink cartridges will be partly used to charge the print head. These
cartridges may print fewer pages compared to subsequent ink cartridges.
最初使用的墨水匣有部分墨水將用於填充列印頭。 這些墨水匣的列印頁數可能
會比後續使用的新墨水匣還少。
To Next Page
Need help?
General