Macintosh
®
OS 8.6 Users
Read This First
The Start Here sheet software installation instructions will not work in Mac OS 8.6. Unpack and
connect your printer as described on the Start Here sheet, then follow the steps below.
Install your printer software:
1. Make sure your printer is on, then turn on your Macintosh. Insert the EPSON CD-ROM in your
drive. If the CD window doesn’t open automatically, double-click the
EPSON CD-ROM icon.
2. Scroll down in the CD-ROM window and double-click the
Drivers folder. Then double-click the
C84 Software Installer icon.
3. Click
Continue, click Install, then click Continue. When the installation is complete, click
Restart to restart your computer.
4. Open the Chooser.
5. Click the
C84 Series icon, click your USB port, and turn on background printing.
6. Close the Chooser.
Install your optional software and manual, and register your printer:
1. Double-click the
EPSON CD-ROM icon, if necessary. Scroll down in the CD-ROM window and
double-click the
Titles folder.
2. Double-click the
Film Factory folder, then double-click the Film Factory Installer icon and
follow the instructions on the screen to install Film Factory.
3. When the installation is complete, close the Film Factory folders.
4. Open the
Titles folder again and double-click the Manual folder. Double-click the Manual
Installer
icon to install the EPSON Printer Information Center.
5. Close the Manual and Titles folders, then double-click the
Drivers folder and double-click the
Ereg folder. Double-click the EpsonReg icon and follow the instructions on the screen to register
your printer.
6. At the last screen, click
Done or close your browser. Then remove the CD-ROM.
You’re ready to start printing! See the details in your Printer Basics book.
© 2003 Epson America, Inc. 8/03
CPD-17000
4047354-00 Printed in USA/Imprimé aux É.-U.
MRMac8-6.fm Page 1 Friday, September 12, 2003 4:21 PM
To Next Page
Need help?
Printing Technology
Paper Handling
