Epson Stylus Pro 9900 User Manual

Epson Stylus Pro 7900/7910/9900/9910 User’s Guide
Maintenance
88
Transporting the printer
When you transport the printer, be sure to repack
the printer using the original box and packing
materials.
Setting up the printer after
transporting
The steps you need to take to set up the printer
after transporting it are almost identical to the
steps carried out the first time you set up the
printer. When you set up the printer again, refer
to the Unpacking and Setup Guide.
A
Make sure that the place is proper.
See "Choosing a place for the printer" in
the Unpacking and Setup Guide
B
Plug in the power cable to the electrical
outlet, and turn on the printer.
See "Setting up" in the Unpacking and
Setup Guide
C
Perform a nozzle check to see if there are
any missing dots.
See “Nozzle check” on page 76
D
Perform the print head alignment to ensure
print quality.
See “Print head alignment” on page 82
c
Caution:
❏ When moving or transporting the printer,
keep it flat. Do not tilt it, stand it on end, or
turn it upside down. Doing so may cause the
ink to leak inside the printer. Also, proper
operation of the printer after moving or
transportation cannot be guaranteed.
❏ When transporting the printer, repack the
printer using the original box and packing
materials to protect it from shock and
vibration.
❏ When moving or transporting this product
equipped with the stand on an uneven
surface, lift the printer and carry it.
❏ When moving or transporting this product
equipped with the stand, check all the screws
for proper tightness on the stand afterward.

Epson Stylus Pro 9900 Specifications

General

Color	Yes
Maximum resolution	2880 x 1440 DPI
Media thickness	0.08 - 1.50 mm
Maximum print size	A0 (841 x 1189 mm)
Maximum roll width	1118 mm
Display	LCD
Internal memory	64 MB
Country of origin	China
Drive device, buffer size	256 MB
Sound pressure level (printing)	50 dB
USB connector	USB Type-A
USB 2.0 ports quantity	1
Ethernet interface type	Fast Ethernet
Compatible operating systems	Microsoft Windows 2000, XP, XP 64-bit, Vista, MAC OSX 10.x.x
Power requirements	AC 100-240V 50/60Hz
Power consumption (active)	80 W
Power consumption (standby)	1 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	5 - 35 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 80 %
Package depth	2040 mm
Package width	815 mm
Package height	1080 mm
Package weight	193053 g
Quantity per pack	1 pc(s)

Weight and Dimensions

Dimensions (WxDxH)	1702 x 678 x 1196 mm