How to connect an Epson POS printer with Ethernet Interface
http://www.beaglehardware.com/howtoethernet.html[3/4/2011 12:27:20 PM]
Select the printer and press Configuration to view or change settings. (Pressing the Launch Browser button will contact
the TMNet WebConfig interface using your web browser.)
When you make changes and press 'OK' the utility sends the new settings to the printer and resets the printer. Note: the
default password is <blank>. Don't forget to make the same changes on the computer side to maintain connectivity.
Type II
Configuration of Ethernet Type II Module
The earlier type of Epson Connect-It Interface used a manual configuration scheme and a simple web interface. The Type
II module can be identified by the red or blue 8 position DIP switch visible on the front of the adapter
An Epson Type II Ethernet Interface Adapter
$199
TM-
H6000III
$349
TM-T88II
$109
TM-T88III
$139
TM-T88IV
$199
TM-T88V
$259
New
TM-U200
$99
To Next Page
Loading...
Need help?
General