5 OPERATION
0440 001 001
- 12 -
© ESAB AB 2020
5 OPERATION
General safety regulations for handling the equipment can be found in the "SAFETY"
chapter of this manual. Read it through before you start using the equipment!
NOTE!
When moving the equipment use intended handle. Never pull on the torch.
WARNING!
Rotating parts can cause injury, take great care.
WARNING!
Assure that the side panels are closed during operation.
WARNING!
Risk of crushing when replacing the wire bobbin! Do not use safety gloves when
inserting the welding wire between the feed rollers.
WARNING!
Lock the bobbin in order to prevent
it from sliding off the hub.
To Next Page
Loading...
Need help?
General
