8. MOUNTING.
Controller should be placed in the panel in hole sized 71x29mm and fasten with mounting
terminals.
Mounting
terminals
Ip65
protection class
Panel surface
(maximum thickness
20mm)
9. INSTALLATION.
Controller meets the requirements for immunity to electromagnetic interference in an
industrial environment according to the following standards:
Electromagnetic compatibility (EMC):
–EN-61000 part 6-4 – requirements for emissivity in an industrial environment
–EN-61000 part 6-2 – requirements for immunity in an industrial environment
It also meets the safety requirements according to standard:
°C
°F
72
max 20
4,5
76
35
M
set
Controller meets the requirements for immunity to electromagnetic interference in an
industrial environment according to the following standards:
Electromagnetic compatibility (EMC):
–EN-61000 part 6-4 – requirements for emissivity in an industrial environment
–EN-61000 part 6-2 – requirements for immunity in an industrial environment
It also meets the safety requirements according to standard:
–EN-61000 part 1 – safety requirements for eletrical devices
Controller meets the requirements of EU directives No. 72/23/EEC; 93/68/EEC; 89/336EEC.
10. ADMISSIONS.
Ip67 protection
class
6
2000 2050
ES-30
COOLING CONTROLLER
Version 2.0
USER MANUAL / WARRANTY
To Next Page
Need help?
General