eufy Security T8510 User Manual

07 English English 08
Screwdriver
Reinforcement
Screws
Note: This step is only necessary if you want to maintain BHMA Grade 2 security, or
you can install strike plate directly.
Step 3: Install the Exterior Assembly
To install the exterior assembly into the doorframe:
1. Measure your cross bore dimension and determine the installation steps accordingly.
• If the diameter of your cross bore is 2 '' / 54 mm, use the provided spacer to
assist in installing the exterior assembly.
• If you have a 1½'' / 38 mm crossbore, remove the spacer.
1
2. Route the cable connected on the exterior assembly under the deadbolt.
3. Align the tailpiece with the center hole of the deadbolt, and insert it into the center
hole.
What is required: Exterior Assembly
2 3
1
4
7
9
5
6
2
3
8
0
1
4
7
9
5
6
2
3
8
0

eufy Security T8510 Specifications

General

Brand	eufy Security
Model	T8510
Category	Locks
Language	English