EVOLV DNA 200 User Manual

Evolv DNA 200
200 Watt Variable Power Module with Temperature Protection and USB
Preliminary Datasheet
The DNA 200 is a power regulated digital switch-mode DC-DC converter for personal vaporizers.
It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, Digital User Controls,
OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal
heat generation. The DNA 200 runs from a 3 cell lithium polymer battery, and features cell-by-cell
battery monitoring and integrated balance charger. The USB port and Evolv’s EScribe software can be
used to customize or monitor the user experience. It is the most advanced personal vaporizer controller
ever made.
Specifications
Minimum
Typical
Max
Output Power
1 Watt
200 Watts
Output Voltage
1 Volt
9.0 Volts
Output Current, continuous
50.0 Amps
Output Current, instantaneous peak
55.0 Amps
Atomizer Resistance, temperature sensing wire, cold
.08 Ohm
.4 Ohm
1.0 Ohm
Atomizer Resistance, kanthal wire
.08 Ohm
.7 Ohm
2.0 Ohms
Temperature Limit
200°F
450°F
600°F
Input Voltage
9.0 Volts
11.1 Volts
12.6 Volts
Input Current
.5 Amps
9.0 Amps
23.0 Amps
Screen On Current
18mA
Quiescent Current
4.5 mA
Power Down Current
5uA
Efficiency
97%

EVOLV DNA 200 Specifications

General

Brand	EVOLV
Model	DNA 200
Category	Portable Generator
Language	English