GREAT BRITAIN - CUSTOMER SERVICE Contact number: 08545 300 9799, e-mail: customerservice@clasohlson.co.uk, internet: www.clasohlson.com/uk
English
M4×14
4 pcs
D8 washer
4 pcs
M5×14
4 pcs
Spacer
8 pcs
M6×14
4 pcs
ST6,3×55
4 pcs
M8×20
4 pcs
Wall plug
4 pcs
D5 washer
4 pcs
D6 washer
4 pcs
1
4
4
5
6
6
7
2
6
3 4
1
6
2
7
3
8
4
9 10
5
7
Ver. 20131025
TV/Monitor Wall Bracket
Art.no 38-5325 Model Wall mount 50/75/100/200
Read the entire instruction manual before use and then safe
it for future reference. We reserve the right to make changes
to text, images and technical data without prior notice. If you
have any technical problems or questions, please contact our
Customer Services.
Assembly
2. Drill holes in the wall using a suitable drill bit.
3. Screw the wall plate to the wall.
Wooden wall
Masonry wall
Disposal
Follow local ordinances when disposing of this product.
If you are unsure about how to dispose of this product
contact your municipality.
Specifications
Compatible with 15–40″ TVs and monitors
Max Vesa 200×200
Size 260×220×17 mm
Weight 1.8 kg
Note:
• The screws and wall plugs supplied with the wall bracket
might not be suitable for the type of wall onto which the
bracket is to be mounted. Replace the screws and plugs
with more suitable fasteners if necessary.
• If you are at all unsure how to assemble or mount this
product do not hesitate to seek expert advice.
1. Hold the bracket up against the wall as a template for
marking where the holes are to be drilled.
4. Bolt the other half of the wall bracket to the TV or monitor.
Use the included bolts and washers. Note: Make sure that
the bolts are long enough to pass through the bracket and
still have enough thread on them to fasten into the TV/monitor.
5. Attach the TV/monitor to the wall
by joining the two halves of
the bracket together.
6. Fasten the bracket using the included bolts.
To Next Page
Need help?
General